Settings questions for the HD3 headset

Have an Ooma Office question not covered by another forum? Post your questions here.
Post Reply
Joe Btfsplk
Posts:2
Joined:Sat Jan 19, 2019 4:42 pm
Settings questions for the HD3 headset

Post by Joe Btfsplk » Sat Jan 19, 2019 5:19 pm

The only support manual that can be found for the HD3 headset appears to be the quick start guide. Unfortunately it is limited in its scope, and several MENU/SETTINGS are not covered. Can anyone tell me what the following settings do?
1. auto answer
2. auto hangup
3. call screening
The unit seems to have some minor issues, and it would be nice to see if these settings would correct them. A more advanced manual that would answer these questions would also be nice, but that's an issue for another time.

murphy
Posts:7513
Joined:Tue Jan 27, 2009 12:49 pm
Location:Pennsylvania

Re: Settings questions for the HD3 headset

Post by murphy » Sun Jan 20, 2019 2:40 am

I don't have an HD3 but those are standard functions.
Auto answer - the call is answered when the HD3 is lifted out of its cradle.
Auto hang up - the call is terminated when the HD3 is placed into its cradle.
Call screening - if the call goes to voicemail you can hear the message as it is being left and can answer it if you want to talk to the caller.
Customer since January 2009
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx

Joe Btfsplk
Posts:2
Joined:Sat Jan 19, 2019 4:42 pm

Re: Settings questions for the HD3 headset

Post by Joe Btfsplk » Sun Jan 20, 2019 3:26 am

Thank you.

Post Reply