Need extra help installing your Ooma Hub or Telo system? Let us know.
- Joined:Thu Jul 31, 2014 12:36 pm
Blue Light Logo on my Ooma has gone out.
The blue light on the logo on my Ooma has gone out, after 3 weeks, but it still works great, is this something I need to see about getting fix or not ???
- Ooma Moderator
- Joined:Sat Sep 05, 2009 8:07 am
try pressing the rewind button to adjust the brightness
- Joined:Fri Feb 06, 2009 11:31 am
- Location:Harstine Island, WA
The logo light on my 2nd generation Telo has also gone very dim over the years. The other touch buttons have kept usable brightness but even at the highest level the logo is still barely visible. Looks more pale white than blue. During loss of connection or reboot the red color is also very very dim. I have offered my unit back for ooma to access but since it still works great I haven't been too worried. It sits in my network closet so the lack of brightness really doesn't bother me. Maybe there is a life-span issue to the LED's that ooma used for the logo.
People I call never seem to comment about the dim bulb at my end - but I'd probably take personal offense if they did.
ooma customer since February 2009
VoIP hardware: 2 Telo w/3 handsets & Linx / ooma core
Total Lines: 8 / Numbers: 11 / Handsets: 20
Lifetime Premier Member
Friends don't remember what Landline Integration was or why we did it.
- Joined:Tue Apr 28, 2009 6:50 pm
- Location:North of Milwaukee WI
Funny, because mine refuses to remain "off". A couple of months ago, I turned them all off on that model, in about a week I looked over and only the center logo was back on. I turned it off again but it faithfully comes back on again.
I think it is when any update is fed to it. I don't have a dim problem so far.
- Joined:Tue Apr 21, 2015 12:12 pm
All blue lights, just not logo, have dimmed to the point they are now silver/white, or you could say grayed out. I contacted Ooma and was told the LEDs must have gotten "crunched" or words to that effect. If they got "crunched" they failed internally on their own, because the unit has not been abused. It is less than 2 years old, but I did elect to extend the warranty during the first year, so they are sending a replacement. I asked if it would be new or refurbed, and was told the latter. The extended warranty will still apply. The telo still seems to function, although I have noticed subpar voice quality of late, so perhaps other parts are failing as well.
- Joined:Thu Jun 18, 2015 2:52 pm
Yes, my Ooma Telo device had the blue light go out last night and I searched everywhere online to find out why or how to adjust. I finally broke down and contacted Ooma customer support. They advised me, like a previous post here, to depress the "back" button << to adjust the brightness. I was looking on the back of the device but then realized what they meant was the REW or rewind button on top of the device.
By each depress of the << button the brightness changes and will go back out. This allows you to adjust it to the desird brightness level.
Hope this helps.
- Joined:Mon Dec 01, 2014 4:39 pm
Thanks for the tip. Just keep pushing left arrow until brightness returns. Back to normal.
- Joined:Thu Sep 26, 2019 6:56 pm
Another way to adjust the Telo logo brightness is through the browser UI:
-> Advanced -> Brightness Control