My Ooma Telo does not have a "wall" jack
Just purchased new Ooma Telo from Amazon and got it Apr 27 2011. I noticed that it came with "Phone" jack only and no "wall" jack as depicted in the documentation. Did I get an older model? Should I return it since I will not be able to use landline integration as a backup?
Thanks
Thanks
Re: My Ooma Telo does not have a "wall" jack
wow, can you post a pic?
Re: My Ooma Telo does not have a "wall" jack
Yes, I'd like to see that too.
Re: My Ooma Telo does not have a "wall" jack
Looks like a manufacturing defect. Who knows, maybe there's a whole production run like that, and you got the first one? Wouldn't that be fun.
Re: My Ooma Telo does not have a "wall" jack
On the bottom of the Telo, there is a label with P/N: 110-0106-100 and next to the Activation code there is label "Revision A". Can any one with a Telo that has a wall jack tell me the P/N and Revison code on their unit?
Thanks
Thanks
Re: My Ooma Telo does not have a "wall" jack
wow, that's odd, maybe a new line of Telos being sold with lesser capabilities? but in that case they should probably be cheaper I would assume, then again it's perhaps a manufacturing defect.
System: Ooma Telo
Mbps: 68 Down / 12 Up
PING TIME: 5Ms
Modem>Router>Telo
===========================
Eli Linares @
http://www.realact.net
===========================
Mbps: 68 Down / 12 Up
PING TIME: 5Ms
Modem>Router>Telo
===========================
Eli Linares @
http://www.realact.net
===========================
Re: My Ooma Telo does not have a "wall" jack
Got mine from Amazon today and no wall jack also. Didn't know it was missing until I saw this post and went back and looked. Paid 199.99 with Prime. I might have to send it back. Instructions that came with it show a wall jack.
Re: My Ooma Telo does not have a "wall" jack
Hopefully, it isn't an arbitrary design change made by the factory.
Usually, the cut-out, where the phone port is, is 2wice as wide so maybe they said "oh, just put 1 RJ11 jack there!"
Usually, the cut-out, where the phone port is, is 2wice as wide so maybe they said "oh, just put 1 RJ11 jack there!"
- southsound
- Posts:3519
- Joined:Fri Feb 06, 2009 11:31 am
- Location:Harstine Island, WA
Re: My Ooma Telo does not have a "wall" jack
Maybe they finally decided to do away with the dreaded "landline integration" and since the WALL jack has no other purpose, I think leaving it off is great! If you have a landline plugged into the Telo and are using landline integration, it will use the landline in the event of network outage - but not power failure. I have never had anything plugged into mine. And I can assure you that it is not an early model - even the first production models had the WALL jack. What you have received is probably a newer version - not a defect at all. I would assume that there are some hardware improvements in the new box so don't be too quick to send it back.
ooma customer since February 2009
VoIP hardware: 2 Telo w/3 handsets & Linx / ooma core
Total Lines: 8 / Numbers: 11 / Handsets: 20
Lifetime Premier Member
Friends don't remember what Landline Integration was or why we did it.
VoIP hardware: 2 Telo w/3 handsets & Linx / ooma core
Total Lines: 8 / Numbers: 11 / Handsets: 20
Lifetime Premier Member
Friends don't remember what Landline Integration was or why we did it.