Ooma dmz using DDWRT firmware

Need extra help installing your Ooma Hub or Telo system? Let us know.
Post Reply
RonLin
Posts:3
Joined:Mon Nov 12, 2012 6:34 am
Ooma dmz using DDWRT firmware

Post by RonLin » Mon Nov 12, 2012 6:39 am

Hi,

I have a Dlink DIR825 with the latest DDWRT firmware. My installation is as follows:

Modem --> Ooma --> Router

I've noticed my port forwarding and my DMZ settings do not work since I can't log into my Fosacam camera through the internet (WAN). I am able to connect to the camera via local internet (LAN) but not wide internet (WAN). Same thing with my Splashtop remote app (its an application that allows you to connect to your PC from anywhere).

Anyone has any idea's what are the settings for this to work?

crunch514
Posts:3
Joined:Mon Nov 12, 2012 7:44 am

Re: Ooma dmz using DDWRT firmware

Post by crunch514 » Mon Nov 12, 2012 7:49 am

I have four Foscam cameras that work fine thru the internet. My setup is:

Modem->router->Ooma.

Ooma seems to work fine with this setup also.

User avatar
lbmofo
Posts:9337
Joined:Sun Mar 14, 2010 7:37 pm
Location:Greater Seattle
Contact:

Re: Ooma dmz using DDWRT firmware

Post by lbmofo » Mon Nov 12, 2012 9:21 am

After router setup is fine.

"Optimal Setup" for after Router - viewtopic.php?t=12403

Post Reply