Ooma hub does not work with Tomato router
-
- Posts:5
- Joined:Wed Dec 23, 2009 6:55 am
Hi,
I am transitioning from a D-link router to an Asus router using tomato. I go from Modem --> Router --> Ooma. When I use that setup with my D-Link DIR 655 router, everything goes well, when I exchange my D-Link with the Asus RT-N66U running Shibby Tomato firmware, the ooma device flashes red and remains red. I tried some QOS settings, but that did not seem to work.
Anybody get this to work on the ooma hub?
Thanks!
Joe
I am transitioning from a D-link router to an Asus router using tomato. I go from Modem --> Router --> Ooma. When I use that setup with my D-Link DIR 655 router, everything goes well, when I exchange my D-Link with the Asus RT-N66U running Shibby Tomato firmware, the ooma device flashes red and remains red. I tried some QOS settings, but that did not seem to work.
Anybody get this to work on the ooma hub?
Thanks!
Joe
Re: Ooma hub does not work with Tomato router
Did you restart the modem when you changed what is connected to it?
It's an absolute requirement.
It's an absolute requirement.
Customer since January 2009
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
-
- Posts:5
- Joined:Wed Dec 23, 2009 6:55 am
Re: Ooma hub does not work with Tomato router
All, just so not to leave you hanging on what I did. I disabled QOS. everything works fine. I ended up pulling the traffic that I wanted prioritized onto a secondary router.