Page 2 of 2
Re: NO DIAL TONE!!!!
Posted: Wed Jun 26, 2013 6:27 pm
by lbmofo
As much as we'd like it, 0 defect rate can not be achieved over time. Companies can aim for it but will never get to 0%.
Unfortunately, you had to deal with this, I am sure very rare, phone port dead on arrival problem. Hope the rest of your Ooma experience will be a lot better.
Re: NO DIAL TONE!!!!
Posted: Sat Apr 01, 2017 4:22 pm
by vmmatt
I'm having exactly the same issue as of 2 days ago. Had service for 2+ years. Phone service from cable company was disconnected 2 yrs ago. No changes to external/internal wiring, already tried resetting modem/router/ooma and no luck. Can get dial tone if Panasonic phone base is connected directly to ooma but not if I try to use wall jack. Any suggestions would be appreciated.
Re: NO DIAL TONE!!!!
Posted: Sat Apr 01, 2017 4:34 pm
by oomamaniacal
vmmatt wrote:I'm having exactly the same issue as of 2 days ago. Had service for 2+ years. Phone service from cable company was disconnected 2 yrs ago. No changes to external/internal wiring, already tried resetting modem/router/ooma and no luck. Can get dial tone if Panasonic phone base is connected directly to ooma but not if I try to use wall jack. Any suggestions would be appreciated.
Have you had a lot of rain recently?
viewtopic.php?f=5&t=19630&p=132120&hilit=rain#p132105
Re: NO DIAL TONE!!!!
Posted: Sun Apr 02, 2017 2:21 am
by murphy
vmmatt wrote:I'm having exactly the same issue as of 2 days ago. Had service for 2+ years. Phone service from cable company was disconnected 2 yrs ago. No changes to external/internal wiring, already tried resetting modem/router/ooma and no luck. Can get dial tone if Panasonic phone base is connected directly to ooma but not if I try to use wall jack. Any suggestions would be appreciated.
Disconnect all of the phones that are connected to the building wiring to see if one of them is causing a problem.