What firmware am I on?
Tom - if it still says 414894 for my firmware release and you put out another on 6/27, would I not see an update come through sometime? Or should I just wait for it to download on its own?
Thanks.
Thanks.
Re: What firmware am I on?
wait for it
Re: What firmware am I on?
Having just installed a unit I've had for multiple years in the box, after 3 weeks it's at 240828, and been that way for a few days.
Any way to force this to speed up for the last ~15 versions? Is the older hardware still able to update to the newest code version? part# 110-0110-253, revision A00 - if that helps...
Michael
Any way to force this to speed up for the last ~15 versions? Is the older hardware still able to update to the newest code version? part# 110-0110-253, revision A00 - if that helps...
Michael
Re: What firmware am I on?
240828 is the latest version for a Telo 1.
Customer since January 2009
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Re: What firmware am I on?
Thanks, seems like it's still trying to update multiple times a day... Does it not know any better? Any real reason for me to upgrade?
Re: What firmware am I on?
The big push on the Telo 2 is the alarm system. I'm not interested since I have had an alarm system since before I ever heard of Ooma.
Customer since January 2009
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Re: What firmware am I on?
So this thing is still going through a reboot cycle a few times a day, and 2x yesterday dropped con-calls I was hosting (no bueno).
As I'm at the last SW version for this (old) HW - is there anyway to disable the unit from searching for an update? I'm assuming this is what's happening; the HW is seeing new SW available, tries to install, then aborts due to level, then reboots....
Or should I say screw it and just get a new unit? I'm finally happy with call quality, after suffering though a few weeks of updates....
As I'm at the last SW version for this (old) HW - is there anyway to disable the unit from searching for an update? I'm assuming this is what's happening; the HW is seeing new SW available, tries to install, then aborts due to level, then reboots....
Or should I say screw it and just get a new unit? I'm finally happy with call quality, after suffering though a few weeks of updates....
Re: What firmware am I on?
The unit does not look for updates. When one is available the server pushes it to the Telo.
Can you test the power supply? You may have a failing power supply.
Can you test the power supply? You may have a failing power supply.
Customer since January 2009
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Re: What firmware am I on?
Lurcher, fixed your telo