Installation Help!! New Problems Page 2
Posted: Sat Aug 15, 2009 4:52 pm
Hello Everyone.
My setup is as follows
DSL (Static IP) (On a Separate line then My land line)
Linksys Router WRT150N
1 Wired Computer
1 Wireless Laptop
1 Wired NAS Server
1 Wired XBox 360
1 Wireless Printer
When I hook the hub up after my router Everything seems to work fine.
DSL Modem ---- Router ---- Ooma hub
I did a test call and there seems to be a delay in the delivery of the conversation. Son would talk and a second or two later I would hear it.
I have tried to hook it up before my router with no success.
DSL Modem ---- Ooma hub ---- Router
My dsl modem lights up like everything is working Green lights on the power, line and LAN. The Ooma hub is blinking red and the 1&2 & Garbage & Emvelope are lit red. I have booted everything and still nothing. Have also checked all connections. I have no internet access setup this way.
Also I can not get into the hub configuration either way I hook it up. I have tryed Setup.ooma.com and 172.27.35.1 and I get am error page.
I'm at my wits end, Please help.
Thanks
Matt
My setup is as follows
DSL (Static IP) (On a Separate line then My land line)
Linksys Router WRT150N
1 Wired Computer
1 Wireless Laptop
1 Wired NAS Server
1 Wired XBox 360
1 Wireless Printer
When I hook the hub up after my router Everything seems to work fine.
DSL Modem ---- Router ---- Ooma hub
I did a test call and there seems to be a delay in the delivery of the conversation. Son would talk and a second or two later I would hear it.
I have tried to hook it up before my router with no success.
DSL Modem ---- Ooma hub ---- Router
My dsl modem lights up like everything is working Green lights on the power, line and LAN. The Ooma hub is blinking red and the 1&2 & Garbage & Emvelope are lit red. I have booted everything and still nothing. Have also checked all connections. I have no internet access setup this way.
Also I can not get into the hub configuration either way I hook it up. I have tryed Setup.ooma.com and 172.27.35.1 and I get am error page.
I'm at my wits end, Please help.
Thanks
Matt