IP from static to dynamic

Need extra help installing your Ooma Hub or Telo system? Let us know.
Post Reply
tcat007
Posts:24
Joined:Sat Aug 03, 2013 11:25 am
IP from static to dynamic

Post by tcat007 » Tue Aug 31, 2021 9:54 am

I originally setup Ooma on static. I'd like to change it back to dynamic since I'm getting a new mesh router with a different IP series (...10.1 rather than ...1.1. I moved the internet cable on Telo to the "Home" connecter, but can't open setup from my PC. What's the secret?

murphy
Posts:7554
Joined:Tue Jan 27, 2009 12:49 pm
Location:Pennsylvania

Re: IP from static to dynamic

Post by murphy » Tue Aug 31, 2021 10:08 am

Does the PC have wireless? If yes, disable it.
Connect to

http://172.27.35.1

The PC must be set to get its IP address via DHCP.
Customer since January 2009
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx

tcat007
Posts:24
Joined:Sat Aug 03, 2013 11:25 am

Re: IP from static to dynamic

Post by tcat007 » Tue Aug 31, 2021 10:17 am

It's an old Dell, wireless is off. Can I just connect HOME to my network, or does it need to go directly into the PC (therefore losing internet to the PC)?

NM, I pulled directly and got to setup screen. Changed to DHCP, all good.

Post Reply