OOMA Telo "No Line"
Posted: Thu Feb 15, 2024 7:19 am
Hi,
I have installed an Ooma Telo in the past and it works great (and has been for several years). I am attempting to help my parents do the same thing at their house. Sadly, we are not in the same area of the country, so I have to rely on video calls, pictures, etc. as I am not able to physically be there to assist them at this time.
They currently have XFinity with Internet and home phone service (much like I did). As a test, we purchased an Ooma Telo, assigned it a temporary number, and got it activated. I had them plug the telo into their router (their xfinity modem is a modem / gateway, but they are only using it as a modem, as we have a separate router providing wi-fi). So for the setup, Xfinity Modem / Gateway > Router > Telo. The telo boots up, and shows a blue light. When they connect a phone to it (brand new cordless phones), it says "no line" on the phone's display. I attempt to make test calls, and when I login to the Ooma dashboard, I see the missed calls, and I can hear the voicemails (they also can hear the voicemails on the telo device itself). The phones never ring, and when they pick the phone up to dial out, there is no dial tone.
We have tried a corded phone as well, with the same results (never rings, no dial tone, yet the telo shows a blue symbol).
We have rebooted the Telo itself a few times, but have not rebooted the modem, the router, etc. What am I missing? I don't want to port their number over until we test this successfully. Once they are able to get off of the Xfinity VOIP setup, the plan is to purchase their own modem, and send the Xfinity combo modem / gateway back, but again, we can't do this just yet.
I have installed an Ooma Telo in the past and it works great (and has been for several years). I am attempting to help my parents do the same thing at their house. Sadly, we are not in the same area of the country, so I have to rely on video calls, pictures, etc. as I am not able to physically be there to assist them at this time.
They currently have XFinity with Internet and home phone service (much like I did). As a test, we purchased an Ooma Telo, assigned it a temporary number, and got it activated. I had them plug the telo into their router (their xfinity modem is a modem / gateway, but they are only using it as a modem, as we have a separate router providing wi-fi). So for the setup, Xfinity Modem / Gateway > Router > Telo. The telo boots up, and shows a blue light. When they connect a phone to it (brand new cordless phones), it says "no line" on the phone's display. I attempt to make test calls, and when I login to the Ooma dashboard, I see the missed calls, and I can hear the voicemails (they also can hear the voicemails on the telo device itself). The phones never ring, and when they pick the phone up to dial out, there is no dial tone.
We have tried a corded phone as well, with the same results (never rings, no dial tone, yet the telo shows a blue symbol).
We have rebooted the Telo itself a few times, but have not rebooted the modem, the router, etc. What am I missing? I don't want to port their number over until we test this successfully. Once they are able to get off of the Xfinity VOIP setup, the plan is to purchase their own modem, and send the Xfinity combo modem / gateway back, but again, we can't do this just yet.