Ooma device setup for optimum call quality
Hello,
I went through lot of topics available in the forum on this topic. But they are somewhat old and dated. Mine is fairly new device that I obtained couple of weeks ago. So, I am thinking the information that is available (bandwidth setup, Qos setup etc) may not relevant to mine so I am asking your help.
Could you let me know what is the optimum setup for a new device like mine, specifically when the device is installed modem->ooma->router ?
Thanks.
I went through lot of topics available in the forum on this topic. But they are somewhat old and dated. Mine is fairly new device that I obtained couple of weeks ago. So, I am thinking the information that is available (bandwidth setup, Qos setup etc) may not relevant to mine so I am asking your help.
Could you let me know what is the optimum setup for a new device like mine, specifically when the device is installed modem->ooma->router ?
Thanks.
-
- Posts:1484
- Joined:Wed Jun 04, 2014 12:58 am
Re: Ooma device setup for optimum call quality
The new Telo is not very much different from the previous one, except for the decrease in the number of buttons on the exterior interface.
Premier Subscriber
Telo One with Four Linx Devices
Google Voice Extensions
Telo One with Four Linx Devices
Google Voice Extensions
-
- Posts:162
- Joined:Wed Mar 27, 2013 12:26 pm
Re: Ooma device setup for optimum call quality
I had the original model (deceased) and now have the new model. Other than fewer buttons, I see no significant change. No insignificant one either, for that matter.