Qos
Re: Qos
Procedure Status Comment
Acquire Downstream Channel 819000000 Hz Locked
Connectivity State OK Operational
Boot State OK Operational
Configuration File OK ?BiABGZgIgBAAAAAAAAAAACJg4yeDqCgmBWAADAYAh1krKogg8Ywm@AAAAAC7fyccBZckn4bWrKGXLJ6gQJ71b
Security Enabled BPI+
Okay, will do that, thanks
Acquire Downstream Channel 819000000 Hz Locked
Connectivity State OK Operational
Boot State OK Operational
Configuration File OK ?BiABGZgIgBAAAAAAAAAAACJg4yeDqCgmBWAADAYAh1krKogg8Ywm@AAAAAC7fyccBZckn4bWrKGXLJ6gQJ71b
Security Enabled BPI+
Okay, will do that, thanks
Netgrear on Spectum <----Linksys EA3500
Linksys EA3500 <---- pc w/ethernet cable
Linksys EA3500 <===Ooma
Linksys EA3500 <----other things
Linksys EA3500 <---- pc w/ethernet cable
Linksys EA3500 <===Ooma
Linksys EA3500 <----other things
Re: Qos
What modem are you currently using? I would expect signal stats for multiple down/up channels. Mine is 24x8 (Arris TM1602AP2), although it only uses 4 upstream. You'll need to post the correct stats, but the gurus there will talk you through it.
Re: Qos
For now its TP-Link TC-7610 with 8 down chs & 4 Up chs
Maybe in couple of days I will switch back to the NetGear CM500 16 down & 4 up
Channel Status Modulation Channel ID Frequency Power SNR
1 Locked QAM256 25 819000000 Hz -0.3 dBmV 38.2 dB
2 Locked QAM256 21 795000000 Hz 0.2 dBmV 37.5 dB
3 Locked QAM256 22 801000000 Hz 0.1 dBmV 38.5 dB
4 Locked QAM256 26 825000000 Hz -0.9 dBmV 38.2 dB
5 Locked QAM256 27 831000000 Hz -1.5 dBmV 36.8 dB
6 Locked QAM256 28 837000000 Hz -1.5 dBmV 36.8 dB
7 Locked QAM256 29 843000000 Hz -2.0 dBmV 35.6 dB
8 Locked QAM256 30 849000000 Hz -1.9 dBmV 37.2 dB
Upstream Bonded Channels
Channel Status Channel Type Channel ID Symbol Rate Frequency Power
1 Locked ATDMA 27 5120 ksym/sec 30600000 Hz 43.3 dBmV
2 Locked TDMA 25 2560 ksym/sec 19400000 Hz 41.8 dBmV
3 Locked ATDMA 26 5120 ksym/sec 24200000 Hz 42.3 dBmV
4 Locked ATDMA 28 5120 ksym/sec 37000000 Hz 45.5 dBmV
Maybe in couple of days I will switch back to the NetGear CM500 16 down & 4 up
Channel Status Modulation Channel ID Frequency Power SNR
1 Locked QAM256 25 819000000 Hz -0.3 dBmV 38.2 dB
2 Locked QAM256 21 795000000 Hz 0.2 dBmV 37.5 dB
3 Locked QAM256 22 801000000 Hz 0.1 dBmV 38.5 dB
4 Locked QAM256 26 825000000 Hz -0.9 dBmV 38.2 dB
5 Locked QAM256 27 831000000 Hz -1.5 dBmV 36.8 dB
6 Locked QAM256 28 837000000 Hz -1.5 dBmV 36.8 dB
7 Locked QAM256 29 843000000 Hz -2.0 dBmV 35.6 dB
8 Locked QAM256 30 849000000 Hz -1.9 dBmV 37.2 dB
Upstream Bonded Channels
Channel Status Channel Type Channel ID Symbol Rate Frequency Power
1 Locked ATDMA 27 5120 ksym/sec 30600000 Hz 43.3 dBmV
2 Locked TDMA 25 2560 ksym/sec 19400000 Hz 41.8 dBmV
3 Locked ATDMA 26 5120 ksym/sec 24200000 Hz 42.3 dBmV
4 Locked ATDMA 28 5120 ksym/sec 37000000 Hz 45.5 dBmV
Netgrear on Spectum <----Linksys EA3500
Linksys EA3500 <---- pc w/ethernet cable
Linksys EA3500 <===Ooma
Linksys EA3500 <----other things
Linksys EA3500 <---- pc w/ethernet cable
Linksys EA3500 <===Ooma
Linksys EA3500 <----other things
Re: Qos
Just a update: I should have done this sooner. After some PFM (pure flicking magic) everything settled and was working fine so I switched back to the NetGear CM500 16ch;s down & 4 ch's up still working good.
I now have replaced my linksys with a Asus RT-AC88u router and all green at http://www.whichvoip.com/voip-test.htm for MOS at 4.2 and COS at 939%.
Thanks for everyone's help and comments
I now have replaced my linksys with a Asus RT-AC88u router and all green at http://www.whichvoip.com/voip-test.htm for MOS at 4.2 and COS at 939%.
Thanks for everyone's help and comments
Netgrear on Spectum <----Linksys EA3500
Linksys EA3500 <---- pc w/ethernet cable
Linksys EA3500 <===Ooma
Linksys EA3500 <----other things
Linksys EA3500 <---- pc w/ethernet cable
Linksys EA3500 <===Ooma
Linksys EA3500 <----other things