GETTING STATIC ON BOTH ENDS
-
- Posts:25
- Joined:Fri Feb 13, 2009 8:48 pm
My current setup is Ooma hub with a landline.
Lately I've been getting a lot of static when I call people, and the people on the other end have been getting a lot of static too. Is there any way I can eliminate the static on both ends?.
Lately I've been getting a lot of static when I call people, and the people on the other end have been getting a lot of static too. Is there any way I can eliminate the static on both ends?.
Re: GETTING STATIC ON BOTH ENDS
Go to this website and see how your internet connection quality looks.
http://www.whichvoip.com/voip/speed_test/ppspeed.html
That's the first place I'd check.
Wayne
http://www.whichvoip.com/voip/speed_test/ppspeed.html
That's the first place I'd check.
Wayne
-
- Posts:25
- Joined:Fri Feb 13, 2009 8:48 pm
Re: GETTING STATIC ON BOTH ENDS
should I do this this on the computer that is directly connected to the router, or would it be ok to do this from a laptop that is wirelessly connected?
Re: GETTING STATIC ON BOTH ENDS
I would test with a pc connected directly, but I don't think it matters much.
Wayne
Wayne
-
- Posts:25
- Joined:Fri Feb 13, 2009 8:48 pm
Re: GETTING STATIC ON BOTH ENDS
All I had to do was power cycle the ooma hub and it stopped. That was kinda weird. Sorry for the late reply, I was busy studying for finals.
-
- Posts:16
- Joined:Sun Mar 15, 2009 8:08 pm
Re: GETTING STATIC ON BOTH ENDS
WayneDsr wrote:I would test with a pc connected directly, but I don't think it matters much.
Wayne
As long as you're using a hardline on the network it should be fine. An added note is not to run any of these kinds of tests via wireless. You'll definitely get mixed results.