Are you dialing 7 digit phone numbers with 10 digit dialing enabled? If you are, after dialing the 7th digit dial a # to let the unit know that there won't be any more numbers.Bernie G wrote:Made a couple calls yesterday. Still a long delay after dialing the last digit. But no busy signal. Will keep trying.
Telo receives calls but does not make calls
Customer since January 2009
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Re: Telo receives calls but does not make calls
Thanks, murphy. I' try that.
Actually, I have tried with and without 10 digit dialing checked, and could not notice a difference. But will try again.
What do most people use? 10 digit on or off?
Actually, I have tried with and without 10 digit dialing checked, and could not notice a difference. But will try again.
What do most people use? 10 digit on or off?
Re: Telo receives calls but does not make calls
I actually never dial only 7 numbers. Around here we always have to dial the area code. So 10 digit dialing is normal. I don't see any difference between having 10 digit dialing turned on or off.
The delay after dialing varies. Now I just wait. Have not had the fast busy signal for a couple days. I can live with that. But there was no delay during my first couple months, so something must have changed.
The delay after dialing varies. Now I just wait. Have not had the fast busy signal for a couple days. I can live with that. But there was no delay during my first couple months, so something must have changed.
Re: Telo receives calls but does not make calls
It has been a long time and may have changed but it used to be with 10 digit dialing turned off you either had to dial 7 digits or 11 digits. I have always had 10 digit dialing enabled because my area switched to 10 digit dialing about 25 years ago.
Customer since January 2009
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Re: Telo receives calls but does not make calls
Bernie G, correct. Enabling 10-digit dialing doesn't do anything in your case.
Re: Telo receives calls but does not make calls
Starting this morning (around 8 AM) I am not able to call out through my Telo. There is no "dial tone." I have also noticed that incoming calls do ring, but when answering the call there is nothing.
Had another problem about a month ago. That got resolved, but now this problem.
Had another problem about a month ago. That got resolved, but now this problem.
Re: Telo receives calls but does not make calls
Try a power cycle. Then if still no dialtone try hooking up a different phone and check wires are firmly fitted. If then still no dialtone the phone port may have gone bad.
Re: Telo receives calls but does not make calls
Yes, the reboot seemed to do the job. Should have thought of that myself
Re: Telo receives calls but does not make calls
I have not had any problems lately. Still occasional delays after dialing, but no busy signals.
Thanks again, Tom.
Thanks again, Tom.
Re: Telo receives calls but does not make calls
TomB:Tom B wrote:Try a power cycle. Then if still no dialtone try hooking up a different phone and check wires are firmly fitted. If then still no dialtone the phone port may have gone bad.
I'm still having this problem (post from previous page). After a while, no outgoing!
Rebooting fixes it "for a while", then it occurs again. I'm in New Hampshire if that helps.
-Rob