Re: Glows blue then 30 seconds later blinking red
Posted: Wed Jul 17, 2019 7:31 am
Well, a factory reset to the AC68 seems to have done the trick. No idea why because I didn't change any settings other than updating the firmware as requested by the router since I bought it.
I have had trouble with Ooma for about 6 months. To the point of replacing the unit. Then them sending me another unit to replace the new unit... still it ended up being connected for about 1.5 minutes and then flash red.
No idea why even to this point, but since a factory reset of the router, all indicators are blue.
No issue with any other device wired or wireless on my network during this same period. My wireless speed is back up to around 189mbps.
Anyway thanks for that assist here and hopefully, this post will help someone else!
Regards
Jim
I have had trouble with Ooma for about 6 months. To the point of replacing the unit. Then them sending me another unit to replace the new unit... still it ended up being connected for about 1.5 minutes and then flash red.
No idea why even to this point, but since a factory reset of the router, all indicators are blue.
No issue with any other device wired or wireless on my network during this same period. My wireless speed is back up to around 189mbps.
Anyway thanks for that assist here and hopefully, this post will help someone else!
Regards
Jim