Telo powered by Power Over Ethernet (PoE)
I would like to have my Telo in a centralized, visible place in the house without all the wires running to it. If the Telo could be powered via PoE then it could be connected via a single Ethernet cable and reduce the clutter of multiple cables running to the box. Using the Ethernet cable removes the need for the power brick to be plugged in near the Telo, so cleans up the outlet space as well. Since my Telo is my interface for 911 emergencies, it is also on UPS battery backup. PoE on the Telo would allow the UPS to be connected to the PoE switch in a remote location and still keep power to the Telo during an outage. Having to keep a bulky UPS connected to the Telo power cord keeps me from having the Telo out where it is visible.
Aside from the aesthetics, I believe this feature could help drive accessory business as well. The HD3, Linx and DP1-T accessories could be used to connect wirelessly and not require a phone line connection to the Telo. And if the upcoming Telo Battery Backup was modified to function as a PoE injector, it could be hidden away and give your customers a behind the scenes way to power the Telo remotely with backup power during outages.
Aside from the aesthetics, I believe this feature could help drive accessory business as well. The HD3, Linx and DP1-T accessories could be used to connect wirelessly and not require a phone line connection to the Telo. And if the upcoming Telo Battery Backup was modified to function as a PoE injector, it could be hidden away and give your customers a behind the scenes way to power the Telo remotely with backup power during outages.
Re: Telo powered by Power Over Ethernet (PoE)
Do a search for: POE 5V splitter
Re: Telo powered by Power Over Ethernet (PoE)
I looked into that. Aside from having the extra clutter behind the Telo, I had a tough time finding a passive splitter with the correct plug to fit the Telo. It would be much cleaner if it were integrated into the Telo itself. Maybe combine this feature with the request for Gigabit Ethernet on the next Telo revision??MLXXXp wrote:Do a search for: POE 5V splitter
Re: Telo powered by Power Over Ethernet (PoE)
I didn't have much trouble.I had a tough time finding a passive splitter with the correct plug to fit the Telo
https://www.amazon.com/Amcrest-Splitter ... B00CDT7KPO
Re: Telo powered by Power Over Ethernet (PoE)
"Maybe combine this feature with the request for Gigabit Ethernet"??? All these POE solutions apply to "Fast Ethernet" (100Mbps), where the 2 spare twisted pairs are used to conduct power. "Gigabit Ethernet" requires all 4 pairs.
Re: Telo powered by Power Over Ethernet (PoE)
Not true. The splitter I linked to above handles 1000Mbps Ethernet.All these POE solutions apply to "Fast Ethernet" (100Mbps)
PoE capability for a 1000Mbps port built into a newer model Telo would also be possible.
Re: Telo powered by Power Over Ethernet (PoE)
Not really. 1st bullet item states "Network devices at Fast Ethernet speeds all within a compact device. "
"2 10/100/1000M Ethernet ports" does not imply Gigabit speeds... just a generic description for the 8-pin/conductor, RJ-45 interface. The device hijacks 2 conductor pairs to deliver power.
http://www.veracityglobal.com/resources ... art-2.aspx
OTOH, THIS one claims full gigabit speeds:
https://www.amazon.com/ANVISION-Splitte ... 928K669HAM
I need to do some reading.
"2 10/100/1000M Ethernet ports" does not imply Gigabit speeds... just a generic description for the 8-pin/conductor, RJ-45 interface. The device hijacks 2 conductor pairs to deliver power.
http://www.veracityglobal.com/resources ... art-2.aspx
OTOH, THIS one claims full gigabit speeds:
https://www.amazon.com/ANVISION-Splitte ... 928K669HAM
I need to do some reading.
Re: Telo powered by Power Over Ethernet (PoE)
Time marches on... 'phantom power' allows for data/voltage to share the 4 conductor pairs.
https://en.wikipedia.org/wiki/Phantom_power
Still, this creates a potential mine field for the non-technical home user. I envision someone repeatedly plugging a 'HOT' network cable into a typical, non-POE device & smoking some component in the chain. While convenient, I'm not convinced integrating this into consumer devices is wise (at this time... IMO).
https://en.wikipedia.org/wiki/Phantom_power
Still, this creates a potential mine field for the non-technical home user. I envision someone repeatedly plugging a 'HOT' network cable into a typical, non-POE device & smoking some component in the chain. While convenient, I'm not convinced integrating this into consumer devices is wise (at this time... IMO).
Re: Telo powered by Power Over Ethernet (PoE)
I agree with this in regards to a future Telo, but for a different reason. Being a consumer device, how many people would actually use the feature? Maybe 1 in 100? (Remember, the equipment on the other end, either the port itself or an added injector, have to make the power available, which isn't common for consumer equipment.)I'm not convinced integrating this into consumer devices is wise
This means that a large majority of people are paying the extra cost needed to build PoE into a Telo, without using it, for the benefit of the very few people who do.
Re: Telo powered by Power Over Ethernet (PoE)
Further, I'm not convinced of the necessity of a GigE interface in the 1st place. Based on the current feature set for 'Internet Security', even a 'behind the router' topography. w/ Telo providing a proxy might(?) have been a more efficient design choice? No need for faster interface. Routers are designed to do the security/QOS. Just my thoughts.