Ooma Replacement Power Adapters

Got something else to discuss that is not covered by the previous forums? Post it here!
User avatar
Posts: 9337
Joined: Sun Mar 14, 2010 7:37 pm
Location: Greater Seattle

Re: Ooma Replacement Power Adapters

Post by lbmofo » Fri Mar 07, 2014 7:09 am

roadshow wrote:Would the universal AC adapters with adjustable voltage and tips that Radio Shack sells work?
If rated 2A or more, yes.

Posts: 1
Joined: Thu Mar 19, 2020 10:02 am

Re: Ooma Replacement Power Adapters

Post by anilbhan » Thu Mar 19, 2020 10:12 am

My Ooma Telo power supply went bad. It still read 5.1 VDC output, but didn't work. I used a friend's Ooma Telo power supply from a working system (which also read 5.1 VDC) and it worked, so I knew it was my power supply. I cracked the power supply open on the seam with a screw driver. I found two bulging capacitors near the cord (680 uF radial 16V 105C). Replaced them. Put the plastic case back on, holding it together with a tightly wound rubber band and tested it. After confirming a successful Ooma boot up, I unplugged it, took off the rubber band and glued the case back together with a glue for plastic. Cost of caps were about $0.20.

Post Reply