OOma HD3 Hanset Batteries

Got something else to discuss that is not covered by the previous forums? Post it here!
Post Reply
4085204908
Posts:1
Joined:Sat Jan 16, 2021 4:06 pm
OOma HD3 Hanset Batteries

Post by 4085204908 » Sat Jan 16, 2021 4:20 pm

Hello,
I have a hard time finding the right AAA 1.5V batteries for the Ooma HD3 handset. I know it must be Ni-MH type according to the manual. I have tried 1.2V. They don't work. So where can I find AAA 1.5V, Ni-MH, 1000mAh batteries?

murphy
Posts:7554
Joined:Tue Jan 27, 2009 12:49 pm
Location:Pennsylvania

Re: OOma HD3 Hanset Batteries

Post by murphy » Sat Jan 16, 2021 4:32 pm

No where. NiMH batteries are 1.2 volts. Only Alkaline primary (not rechargeable) cells are 1.5 volts.

I don't have an HD3 but the batteries in my HD2 are NiMH 1.2V 1800 mAh. The brand is EPT and they were made in China.
Customer since January 2009
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx

andyross
Posts:74
Joined:Mon Apr 16, 2018 6:35 am

Re: OOma HD3 Hanset Batteries

Post by andyross » Sun Jan 17, 2021 8:10 am

On my HD3, they are GP brand 75AAAHC, 1.2V, 750mAh. You should be able to use a higher rated capacity (850mAh+), and get longer life.
https://www.gpbatteries.com/collections ... s/size_aaa

On that page, the gray batteries are designed for high recharge cycle counts. Useful if you often run the battery nearly all the way down before recharging.

Post Reply