enable "fax mode"
Dave,
I am unable to get my security system to work either. Specifically, my security panel calls out just fine, but, the security monitoring center does not recognize the tones sent over the line by the Ooma. The result is that the security monitoring station rejects the call as inauthenticated and hangs up on it. The security panel will repeat this process and continute to get hung up on about 15-20 times until it gives up. I paid an installer to come out and he tried everything to get it to work. Ooma suport was not knowledgable enough to help guide us.
*99 and *98, or any * prefix is not possible with my panel for dialing because the * = "Save" the call out number.
Were you able to get yours working again?
Thanks
I am unable to get my security system to work either. Specifically, my security panel calls out just fine, but, the security monitoring center does not recognize the tones sent over the line by the Ooma. The result is that the security monitoring station rejects the call as inauthenticated and hangs up on it. The security panel will repeat this process and continute to get hung up on about 15-20 times until it gives up. I paid an installer to come out and he tried everything to get it to work. Ooma suport was not knowledgable enough to help guide us.
*99 and *98, or any * prefix is not possible with my panel for dialing because the * = "Save" the call out number.
Were you able to get yours working again?
Thanks
Re: enable "fax mode"
What brand is the panel?
On an Ademco Vista 20P
* 99 pause
is entered as
#1199#13
On an Ademco Vista 20P
* 99 pause
is entered as
#1199#13
Customer since January 2009
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Re: enable "fax mode"
Are these codes also good for an Ademco/Honeywell Lynx? I just found out that is the panel model.
Thanks
Thanks
Re: enable "fax mode"
Yes. Any installer that doesn't know how to do this or where to find it in the installation manual is a poor installer.roodhawg wrote:Are these codes also good for an Ademco/Honeywell Lynx? I just found out that is the panel model.
Thanks
Or else didn't want to do it so he could sell you a GSM radio.
Customer since January 2009
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Re: enable "fax mode"
Murphy,
Thanks for this. I do not believe that we tried this combination of values. I'll post back once I have a chance to tinker with it again...
Thanks for this. I do not believe that we tried this combination of values. I'll post back once I have a chance to tinker with it again...
Re: enable "fax mode"
For fax mode please see viewtopic.php?f=2&t=15197