How should we power down the Ooma?
-
- Posts:5
- Joined:Wed Oct 24, 2012 6:31 am
I installed my Ooma about a week ago. This weekend it got bricked when I unplugged it to move it to its permanent location. When I plugged it back in I got the runway lights cycling problem often sited in the forum. Ooma sent a replacement which I received the next afternoon. Very good service I should say.
There was mention that the Ooma might be better on a UPS, and I might agree, but what happened didn't have anything to do with a power surge. It was just that I unplugged it myself and plugged it back in a half an hour later.
Now I am afraid to ever unplug it again. I am starting to think of the Ooma as quite fragile. Even on a UPS, if the power is out long enough, which it usually is around here when it goes out, it will have to shut down. So then my question is, what is the safest way to power down the Ooma?
There was mention that the Ooma might be better on a UPS, and I might agree, but what happened didn't have anything to do with a power surge. It was just that I unplugged it myself and plugged it back in a half an hour later.
Now I am afraid to ever unplug it again. I am starting to think of the Ooma as quite fragile. Even on a UPS, if the power is out long enough, which it usually is around here when it goes out, it will have to shut down. So then my question is, what is the safest way to power down the Ooma?
Re: How should we power down the Ooma?
I have been pulling the power plug out of the back of mine for years with no problems observed.
Customer since January 2009
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
-
- Posts:6388
- Joined:Mon Nov 08, 2010 4:41 pm
Re: How should we power down the Ooma?
SpockThePain:
I have unpowered and repowered the Ooma Telos that I have many, many times without any problems.
Of coarse I never uppower the Ooma Telo during boot.
Even if I connect the network cables into the wrong ports, nothing has ever happend.
For me, the Ooma Telos seems to be very rugged, with the exception of lightening sticks or large power surges.
You seem to have something odd happening??? Maybe you just go a hold of a couple of defective Ooma Telos???
I have unpowered and repowered the Ooma Telos that I have many, many times without any problems.
Of coarse I never uppower the Ooma Telo during boot.
Even if I connect the network cables into the wrong ports, nothing has ever happend.
For me, the Ooma Telos seems to be very rugged, with the exception of lightening sticks or large power surges.
You seem to have something odd happening??? Maybe you just go a hold of a couple of defective Ooma Telos???
-
- Posts:5
- Joined:Wed Oct 24, 2012 6:31 am
Re: How should we power down the Ooma?
I should clarify I only the first Ooma got bricked. When it was unplugged everything was blue, so I don't think it was in the middle of any sort of update.
It is too soon to know anything about the durability of the replacement. I am hoping for the best as there will be all sorts of power outage opportunity in this area.
Please note this is not a knock on Ooma service. The chain of events was
Tuesday - Purchased Ooma
Thursday - Installed
Friday - Already satisfied with sound quality, submitted number porting request
Saturday - Moved, bricked.
Monday - Contacted Ooma, determined replacement needed
Tuesday - Received replacement, worked when connected
Thursday (tomorrow) - Number port will be complete. Phone company service will be terminated.
It is hard to complain about this. I will probably get the two year warranty extension, a bargain, the cost is only about 3 months traditional phone service.
It is too soon to know anything about the durability of the replacement. I am hoping for the best as there will be all sorts of power outage opportunity in this area.
Please note this is not a knock on Ooma service. The chain of events was
Tuesday - Purchased Ooma
Thursday - Installed
Friday - Already satisfied with sound quality, submitted number porting request
Saturday - Moved, bricked.
Monday - Contacted Ooma, determined replacement needed
Tuesday - Received replacement, worked when connected
Thursday (tomorrow) - Number port will be complete. Phone company service will be terminated.
It is hard to complain about this. I will probably get the two year warranty extension, a bargain, the cost is only about 3 months traditional phone service.
- focuspuller
- Posts:175
- Joined:Fri Sep 04, 2009 2:45 pm
- Location:Third Planet From The Sun
Re: How should we power down the Ooma?
CAUTION IN ON A UPS.
Found out the hard way when power went out and my UPS kicked in. Had to shut down UPS because outage was going to last more than a day.
When power came back on I turned on the UPS....The turn on of the UPS to connected devices had a surge to the ones that self powered, like the TELO. Mine went to lights 1 and 2 and could not reboot.
So if on a UPS and you need to shut it down, unplug all devices from the UPS after it shuts down. Then when power is restored and UPS is on line again plug in your devices to the UPS.
Found out the hard way when power went out and my UPS kicked in. Had to shut down UPS because outage was going to last more than a day.
When power came back on I turned on the UPS....The turn on of the UPS to connected devices had a surge to the ones that self powered, like the TELO. Mine went to lights 1 and 2 and could not reboot.
So if on a UPS and you need to shut it down, unplug all devices from the UPS after it shuts down. Then when power is restored and UPS is on line again plug in your devices to the UPS.
One if by Land
Two if by Sea
Three if by Limo
Two if by Sea
Three if by Limo
-
- Posts:5
- Joined:Wed Oct 24, 2012 6:31 am
Re: How should we power down the Ooma?
focuspuller,
I'm getting the impression it might be a little finicky, but others say not to worry.
One thing I think I will do in the future is unplug the AC from the power strip instead of pulling the DC plug on the back. The wall plug is harder to get to but it might be easier on the unit to do it this way. Heck I have no idea either way whats going on.
I'm getting the impression it might be a little finicky, but others say not to worry.
One thing I think I will do in the future is unplug the AC from the power strip instead of pulling the DC plug on the back. The wall plug is harder to get to but it might be easier on the unit to do it this way. Heck I have no idea either way whats going on.
Re: How should we power down the Ooma?
If you get a decent enough ups... mine, once power goes out, will run my computer and all things for about 20-30 minutes. If I power off the computer, about 2-3 hours. (if you can deal with the beeping!!) Here in Charlotte, NC you get power fluctuations with storms that pass through the area and I've found that I had to go get really good and expensive $200+ UPS in order to deal with the electricity issues in the summer. All this is good information. I would think the ooma device is like any router you have connected to your network? Unplug from back of device... move to new location, plug back in? I think the reason you had an issue was simply because you had a defective ooma device. I can't imagine these things being that fragile other wise it would be all over the message boards if it were a common issue.