QOS issues
People have had good success using the linksys routers
- scottlindner
- Posts:1003
- Joined:Sun May 17, 2009 4:47 am
- Location:Colorado Springs, CO
Re: QOS issues
I see. When you are at your parent's place next, jot down the model number.just4fn wrote:Its a netgear router. The problem is, is that its about 6 miles away at my parents house and I dont remember the model number. I do have a linksys router model wrt54g. I might try that one.
If you don't mind mucking around with your firmware on your WRT54G, give Tomato a try. http://www.polarcloud.com/tomato I have a WRT54GL and Tomato kicks butt for managing QoS.
Cheers,
Scott
- scottlindner
- Posts:1003
- Joined:Sun May 17, 2009 4:47 am
- Location:Colorado Springs, CO
Re: QOS issues
I have done extensive tests with DD-WRT. Although the UI is very pretty, the QoS features are utterly broken in all variants of v24. Very high packet losses, jitter increases up to 55ms, low throughput. There is a big explosion of threads about the QoS problems on the DD-WRT forums at the moment.frank1 wrote:Or http://www.dd-wrt.com/
I would recommend staying away from it unless you like to tinker and test.
Cheers,
Scott
Re: QOS issues
VoIP test statistics
--------------------
Jitter: you --> server: 1.0 ms
Jitter: server --> you: 5.4 ms
Packet loss: you --> server: 0.0 %
Packet loss: server --> you: 0.0 %
Packet discards: 0.0 %
Packets out of order: 0.0 %
Estimated MOS score: 4.0
Speed test statistics
---------------------
Download speed: 11309240 bps
Upload speed: 5850032 bps
Download quality of service: 94 %
Upload quality of service: 98 %
Download test type: socket
Upload test type: socket
Maximum TCP delay: 37 ms
Average download pause: 1 ms
Minimum round trip time to server: 41 ms
Average round trip time to server: 43 ms
Estimated download bandwidth: 20000000bps
Route concurrency: 1.7684654
Download TCP forced idle: 39 %
Maximum route speed: 12787312bps
These are the numbes after the linksys router is installed. I think I will keep it in!
--------------------
Jitter: you --> server: 1.0 ms
Jitter: server --> you: 5.4 ms
Packet loss: you --> server: 0.0 %
Packet loss: server --> you: 0.0 %
Packet discards: 0.0 %
Packets out of order: 0.0 %
Estimated MOS score: 4.0
Speed test statistics
---------------------
Download speed: 11309240 bps
Upload speed: 5850032 bps
Download quality of service: 94 %
Upload quality of service: 98 %
Download test type: socket
Upload test type: socket
Maximum TCP delay: 37 ms
Average download pause: 1 ms
Minimum round trip time to server: 41 ms
Average round trip time to server: 43 ms
Estimated download bandwidth: 20000000bps
Route concurrency: 1.7684654
Download TCP forced idle: 39 %
Maximum route speed: 12787312bps
These are the numbes after the linksys router is installed. I think I will keep it in!
Ooma Telo, Hub.
1958 was a very good year!
No cell phone , no land line- just Ooma
all my eggs in one Ooma basket
I lied- my wife has a cell, but not me!! I like my privacy and not being attached to a phone.
1958 was a very good year!
No cell phone , no land line- just Ooma
all my eggs in one Ooma basket
I lied- my wife has a cell, but not me!! I like my privacy and not being attached to a phone.
Re: QOS issues
for sure - good numbers
(of course it helps that both linsys and ooma designers are formerly from cisco!)
(of course it helps that both linsys and ooma designers are formerly from cisco!)
- scottlindner
- Posts:1003
- Joined:Sun May 17, 2009 4:47 am
- Location:Colorado Springs, CO
Re: QOS issues
That's excellent. A single router change and everything is better!
Scott
Scott
Re: QOS issues
Thanks for the support and comments. Maybe this may help others with poor QOS. I dont know if it will fix everybodys QOS but it seem to have solved my issues. The 1st step is to eliminate the router and just get data directly from the modem.
Ooma Telo, Hub.
1958 was a very good year!
No cell phone , no land line- just Ooma
all my eggs in one Ooma basket
I lied- my wife has a cell, but not me!! I like my privacy and not being attached to a phone.
1958 was a very good year!
No cell phone , no land line- just Ooma
all my eggs in one Ooma basket
I lied- my wife has a cell, but not me!! I like my privacy and not being attached to a phone.
Re: QOS issues
Darn it... I just bricked my router with DD-WRT.scottlindner wrote:I have done extensive tests with DD-WRT. Although the UI is very pretty, the QoS features are utterly broken in all variants of v24. Very high packet losses, jitter increases up to 55ms, low throughput. There is a big explosion of threads about the QoS problems on the DD-WRT forums at the moment.frank1 wrote:Or http://www.dd-wrt.com/
I would recommend staying away from it unless you like to tinker and test.
Cheers,
Scott
Maybe I'll buy a used wrt54g from ebay pre-flashed with tomato.
I wanted to set up a router in "client bridge" mode, and play around with it for some wired devices I want to use as wireless. I'm guessing tomato has that functionality, because I know DD-WRT does.
- scottlindner
- Posts:1003
- Joined:Sun May 17, 2009 4:47 am
- Location:Colorado Springs, CO
Re: QOS issues
I bricked mine as well. I can help you unbrick it.frank1 wrote:Darn it... I just bricked my router with DD-WRT.scottlindner wrote:I have done extensive tests with DD-WRT. Although the UI is very pretty, the QoS features are utterly broken in all variants of v24. Very high packet losses, jitter increases up to 55ms, low throughput. There is a big explosion of threads about the QoS problems on the DD-WRT forums at the moment.frank1 wrote:Or http://www.dd-wrt.com/
I would recommend staying away from it unless you like to tinker and test.
Cheers,
Scott
Maybe I'll buy a used wrt54g from ebay pre-flashed with tomato.
I wanted to set up a router in "client bridge" mode, and play around with it for some wired devices I want to use as wireless. I'm guessing tomato has that functionality, because I know DD-WRT does.
Does the power LED flash rapidly and never stop flashing? If so, there is a very easy way to unbrick it.
I also have a theory how I bricked mine. Did you do the standard build, or the mini or micro build?
Scott