Am I still on the East Coast Server - Very Poor Call Quality
After a year of decent service, my call quality has gotten so bad people can't hear me on the other end. Ironically, my internet connection speed recently doubled to 100/10 and I verified I have that speed.
Tom - can you please confirm that I am still on the East Coast server?
Thank you.
Tom - can you please confirm that I am still on the East Coast server?
Thank you.
Re: Am I still on the East Coast Server - Very Poor Call Quality
Good idea. I got 20ms ping, 5ms jitter, 94.8 down and 11.4 up.
Re: Am I still on the East Coast Server - Very Poor Call Quality
Which begs the question... how is the Ooma device connected? Behind router? Tried a different cat5e cable?
Re: Am I still on the East Coast Server - Very Poor Call Quality
Did you get all green flags on that test?
Customer since January 2009
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Re: Am I still on the East Coast Server - Very Poor Call Quality
Ok - so I ran this on another test site, but I bit the bullet and downloaded BCS.
I got all green circles:
jitter = .4ms
packet loss = 0%
MOS estimated to be a 4
download speed 8.2 Mbps
upload speed 8.2 Mbps
Consistency = 85.3%
The Telo is connected behind the router (plugged in to an ethernet port).
I got all green circles:
jitter = .4ms
packet loss = 0%
MOS estimated to be a 4
download speed 8.2 Mbps
upload speed 8.2 Mbps
Consistency = 85.3%
The Telo is connected behind the router (plugged in to an ethernet port).
Re: Am I still on the East Coast Server - Very Poor Call Quality
On the VoIP tab of the test results, does it report 'SIP ALG Firewall: N'?
If not, look into disabling that on the router [rtfm].
If an ISP-provided router, they may have to do it for you.
Are you seeing comparable MOS scores for your calls?
http://[TeloIP]/callStats.lp
Your connection is good, at least from your PC to the test server, so things I would look at (in no particular order), just to eliminate your network as the issue.
- Look into configuring QOS on router [rtfm].
- Try a different ethernet cable between Telo & router.
- Try a different router port.
If not, look into disabling that on the router [rtfm].
If an ISP-provided router, they may have to do it for you.
Are you seeing comparable MOS scores for your calls?
http://[TeloIP]/callStats.lp
Your connection is good, at least from your PC to the test server, so things I would look at (in no particular order), just to eliminate your network as the issue.
- Look into configuring QOS on router [rtfm].
- Try a different ethernet cable between Telo & router.
- Try a different router port.
Re: Am I still on the East Coast Server - Very Poor Call Quality
My solution: try a different phone service privider.
Re: Am I still on the East Coast Server - Very Poor Call Quality
@TonyW
SIP ALG is not relevant. OOMA Telo sets up an OpenVPN tunnel to it's server.
P
SIP ALG is not relevant. OOMA Telo sets up an OpenVPN tunnel to it's server.
P
Re: Am I still on the East Coast Server - Very Poor Call Quality
Just trying to cover all bases & THOUGHT I recalled it being mentioned here, somewhere. Thanks.