Quick Setup Question
-
- Posts:42
- Joined:Thu Jul 30, 2009 2:00 pm
- Location:Lexington, Ohio
So I just got OOMA and I want to put OOMA *BEHIND* my router. Just to verify I am doing this correctly, would I run from my router to the HOME port on my OOMA? And then if I want all the phones in the house to ring, just run from the WALL port on the OOMA directly into the phone jack on the wall so that they all will ring. Am I correct in this setup?
Thanks in advance,
Neal
Thanks in advance,
Neal
- southsound
- Posts:3519
- Joined:Fri Feb 06, 2009 11:31 am
- Location:Harstine Island, WA
Re: Quick Setup Question
Not quite. The input to the hub from the Internet is the MODEM jack. The voice output that simulates a regular phone line is the PHONE jack. There are additional considerations if you have DSL running on your existing wiring but if not, just connect it like I've said and you are good to go. If your router has QoS settings there are some on the forum who can help you tweak things for best voice quality.
Further info - the WALL jack is if you are using a scout or if you are integrating your hub with an existing landline. The HOME jack is the network output if you have the ooma hub between the modem and router or PC.
Further info - the WALL jack is if you are using a scout or if you are integrating your hub with an existing landline. The HOME jack is the network output if you have the ooma hub between the modem and router or PC.
ooma customer since February 2009
VoIP hardware: 2 Telo w/3 handsets & Linx / ooma core
Total Lines: 8 / Numbers: 11 / Handsets: 20
Lifetime Premier Member
Friends don't remember what Landline Integration was or why we did it.
VoIP hardware: 2 Telo w/3 handsets & Linx / ooma core
Total Lines: 8 / Numbers: 11 / Handsets: 20
Lifetime Premier Member
Friends don't remember what Landline Integration was or why we did it.
-
- Posts:42
- Joined:Thu Jul 30, 2009 2:00 pm
- Location:Lexington, Ohio
Re: Quick Setup Question
So I want to run from my router port to the MODEM port on my OOMA? I thought I read that I run out of the WALL jack on the ooma hub for the phone line directly into my wall jack in the house so that ooma works on the existing phone lines in the house? Please help me clarify. I'm stuck at work and want to get it up and running when I get homesouthsound wrote:Not quite. The input to the hub from the Internet is the MODEM jack. The voice output that simulates a regular phone line is the PHONE jack. There are additional considerations if you have DSL running on your existing wiring but if not, just connect it like I've said and you are good to go. If your router has QoS settings there are some on the forum who can help you tweak things for best voice quality.
Further info - the WALL jack is if you are using a scout or if you are integrating your hub with an existing landline. The HOME jack is the network output if you have the ooma hub between the modem and router or PC.
P.S.
I run Road Runner cable internet and I'm not planning on using any scouts. I just want to use the hub and have it run all the phones in the homes existing landline wiring.
- Aveamantium
- Posts:1352
- Joined:Sat Jun 20, 2009 2:28 pm
- Location:Loveland, Colorado
Re: Quick Setup Question
Yes, run the router to the MODEM port on the ooma (don't need to mess with the Home port on the hub since it is behind your router). The WALL jack is only to communicate with the scout unless you're using the integrated land line. If you want to "power" your phones through your house wiring connect the PHONE port to a wall plate. Keep in mind you need to make sure that you are disconnected from the street if you want to connect the phone port to your house wiring!Franchise_24 wrote:So I want to run from my router port to the MODEM port on my OOMA? I thought I read that I run out of the WALL jack on the ooma hub for the phone line directly into my wall jack in the house so that ooma works on the existing phone lines in the house? Please help me clarify. I'm stuck at work and want to get it up and running when I get homesouthsound wrote:Not quite. The input to the hub from the Internet is the MODEM jack. The voice output that simulates a regular phone line is the PHONE jack. There are additional considerations if you have DSL running on your existing wiring but if not, just connect it like I've said and you are good to go. If your router has QoS settings there are some on the forum who can help you tweak things for best voice quality.
Further info - the WALL jack is if you are using a scout or if you are integrating your hub with an existing landline. The HOME jack is the network output if you have the ooma hub between the modem and router or PC.
P.S.
I run Road Runner cable internet and I'm not planning on using any scouts. I just want to use the hub and have it run all the phones in the homes existing landline wiring.
See this http://michigantelephone.workbench.net/ on how to disconnect from the street.
Go AVS!
-
- Posts:42
- Joined:Thu Jul 30, 2009 2:00 pm
- Location:Lexington, Ohio
Re: Quick Setup Question
Ok. Thanks for the great information. I am porting my number and have a temp one right now, can I wait to disconnect till after the port is complete and use both systems right now? In other words, is it okay to set it up that way to use ooma, but when someone still calls the old number the phones in the house will still ring until it is ported over.
- Aveamantium
- Posts:1352
- Joined:Sat Jun 20, 2009 2:28 pm
- Location:Loveland, Colorado
Re: Quick Setup Question
In that case I'd leave your house wiring as is until the port is complete. In the interim hook up a wireless phone to the PHONE port on the ooma so you can start to enjoy the benefits of ooma today.Franchise_24 wrote:Ok. Thanks for the great information. I am porting my number and have a temp one right now, can I wait to disconnect till after the port is complete and use both systems right now? In other words, is it okay to set it up that way to use ooma, but when someone still calls the old number the phones in the house will still ring until it is ported over.
If you can't wait, you can see if you can forward your old service to the temporary ooma number until the port completes and then go ahead and incorporate the ooma into your house wiring as described above.
Go AVS!
Re: Quick Setup Question
Leave your house wiring intactFranchise_24 wrote:Ok. Thanks for the great information. I am porting my number and have a temp one right now, can I wait to disconnect till after the port is complete and use both systems right now? In other words, is it okay to set it up that way to use ooma, but when someone still calls the old number the phones in the house will still ring until it is ported over.
Setup ooma with the temp number and plug a corded phone or wireless base station into the ooma phone jack
You now can use your original line for incoming calls (everyone knows that number)
You can use ooma to call out for free local and long distance
When your number ports your temp number disappears. You can then plug the house wiring into ooma and have the ooma dialtone available on all wall jacks
-
- Posts:42
- Joined:Thu Jul 30, 2009 2:00 pm
- Location:Lexington, Ohio
Re: Quick Setup Question
Again, I would like to take a second to thank *everyone* for the quick replies and great information. I appreciate it.
Thanks,
Neal
Thanks,
Neal
- southsound
- Posts:3519
- Joined:Fri Feb 06, 2009 11:31 am
- Location:Harstine Island, WA
Re: Quick Setup Question
Where's our manners? - I guess I'll be the first to say it - Welcome to ooma, Neal. I think you're going to like it here. Lots of nice helpful people who will help you with questions and we also have a great support group for those who are going though withdrawal from those thick phone bills they used to receive every month!
ooma customer since February 2009
VoIP hardware: 2 Telo w/3 handsets & Linx / ooma core
Total Lines: 8 / Numbers: 11 / Handsets: 20
Lifetime Premier Member
Friends don't remember what Landline Integration was or why we did it.
VoIP hardware: 2 Telo w/3 handsets & Linx / ooma core
Total Lines: 8 / Numbers: 11 / Handsets: 20
Lifetime Premier Member
Friends don't remember what Landline Integration was or why we did it.
-
- Posts:42
- Joined:Thu Jul 30, 2009 2:00 pm
- Location:Lexington, Ohio
Re: Quick Setup Question
On a side note, what *could* happen if I left my house wired to the street and hooked ooma to it so it would ring through the existing phone lines? How realistic is it that voltage goes through those lines?southsound wrote:Where's our manners? - I guess I'll be the first to say it - Welcome to ooma, Neal. I think you're going to like it here. Lots of nice helpful people who will help you with questions and we also have a great support group for those who are going though withdrawal from those thick phone bills they used to receive every month!