Ooma Telo does not allow all users to call me.

Have an Ooma Office question not covered by another forum? Post your questions here.
Post Reply
GiorgosC
Posts:13
Joined:Wed Sep 07, 2011 6:37 am
Ooma Telo does not allow all users to call me.

Post by GiorgosC » Wed Jan 30, 2019 5:14 pm

Ooma Telo does not allow users to call me.

I suspect when they use their own system it acts according to the system.

So far I identified 3 callers.

I asked what seems to be the problem, and they said when I try to call you, I get a busy signal.

Another one, he calls and it rings in his phone, it is totally quiet in mine....

:| The third one I could not find the reason.

User avatar
vgiordano
Posts:54
Joined:Thu Jan 14, 2016 1:37 pm
Location:Pennsylvania
Contact:

Re: Ooma Telo does not allow all users to call me.

Post by vgiordano » Wed Jan 30, 2019 6:18 pm

This was posted in Ooma Office - it should go here: https://www.ooma.com/forums/viewforum.php?f=9
Ooma Office since September 2015
Fiber internet
2 base stations with 2 linx, 5 Yealink T21's

GiorgosC
Posts:13
Joined:Wed Sep 07, 2011 6:37 am

Re: Ooma Telo does not allow all users to call me.

Post by GiorgosC » Wed Jan 30, 2019 6:33 pm

How it should be moved?

oomamaniacal
Posts:1484
Joined:Wed Jun 04, 2014 12:58 am

Re: Ooma Telo does not allow all users to call me.

Post by oomamaniacal » Wed Jan 30, 2019 7:35 pm

Just post a second time in the correct section.
Premier Subscriber
Telo One with Four Linx Devices
Google Voice Extensions

User avatar
vgiordano
Posts:54
Joined:Thu Jan 14, 2016 1:37 pm
Location:Pennsylvania
Contact:

Re: Ooma Telo does not allow all users to call me.

Post by vgiordano » Tue Feb 05, 2019 7:42 am

You can message an admin and provide the link to this thread and they can move it.
Ooma Office since September 2015
Fiber internet
2 base stations with 2 linx, 5 Yealink T21's

NdnaJnz
Posts:15
Joined:Tue May 01, 2018 6:10 pm
Location:San Francisco Bay Area
Contact:

Re: Ooma Telo - MOVED TO Ooma Home

Post by NdnaJnz » Tue Feb 05, 2019 10:25 pm

Sorry, wrong forum.
Moved to Ooma Home - Ooma Telo - Calling and Usage at:
https://www.ooma.com/forums/viewtopic.php?f=5&t=22171

Jeff
-------------------------

Original message:

I have two Ooma Telos. For about the past week, I could not retrieve my messages from either one using the blinking Play (arrow) button. Occasionally, I press the button, and nothing happens for 20-30 seconds, then the usual announcement from the Telo begins and works normally from that point. But, most of the time, I press the button and 5-10 seconds later, it starts blinking again.

The same happens if I try to retrieve voice messages from my Panasonic Cordless (or the wired handset) which has been working fine since last April.

I am able to retrieve voice messages using my cell phone, or by clicking the recording forwarded to my email.

But, I received an important message on the second line adding a "by-the-way, your other phone line sounds like it's dead; silence for 5 seconds and then a fast busy signal.

So, there obviously seems to be a problem somewhere in the system or in the latest firmware update. Unlikely a fluke or coincidence with both Telos suddenly having problems.

Jeff
---------------------
Last edited by NdnaJnz on Wed Feb 06, 2019 1:59 pm, edited 2 times in total.

oomamaniacal
Posts:1484
Joined:Wed Jun 04, 2014 12:58 am

Re: Ooma Telo does not allow all users to call me.

Post by oomamaniacal » Wed Feb 06, 2019 12:30 pm

Hi Jeff,

Your post is in the Ooma Office section. There is a separate forum for Ooma Home.
Premier Subscriber
Telo One with Four Linx Devices
Google Voice Extensions

NdnaJnz
Posts:15
Joined:Tue May 01, 2018 6:10 pm
Location:San Francisco Bay Area
Contact:

Re: Ooma Telo does not allow all users to call me.

Post by NdnaJnz » Wed Feb 06, 2019 1:48 pm

Oops! Sorry about that. I used to have an Ooma Office. Must be stuck in my browser autocomplete or a cookie.

Thanks,
Jeff

Post Reply