HD3 answer call
i have 4 handsets (1-HD3, 2-HD2, 1 pendant). when answering a call on the HD3, it would drop the call after 10 seconds (exactly, every time). Outgoing calls are OK. Answering calls on the HD2 units were OK.
I thought the HD3 was bad. I bought a new one from Amazon.
I unregistered the old one and registered the new one.
i still get dropped incoming calls on the HD3.
i discovered today that if i change the HD3 setting for AUTO-ANSWER, i can successfully receive and maintain incoming calls. So, i vaguely recall some software update in June 2019 and i think this worked fine before that.
anyone noticed this problem????
I thought the HD3 was bad. I bought a new one from Amazon.
I unregistered the old one and registered the new one.
i still get dropped incoming calls on the HD3.
i discovered today that if i change the HD3 setting for AUTO-ANSWER, i can successfully receive and maintain incoming calls. So, i vaguely recall some software update in June 2019 and i think this worked fine before that.
anyone noticed this problem????
Re: HD3 answer call
So no dropped calls when you change AUTO-ANSWER to which setting?
I cannot reproduce the reproduce the problem with either setting (on or off).
- HS rings
- press green button to answer
- HS transitions from ringing to answered screen (call timer starts running)
- don't bring HS to ear but simply observe the screen
- what happens?
Can you reproduce this when answering an intercom call?
I cannot reproduce the reproduce the problem with either setting (on or off).
- HS rings
- press green button to answer
- HS transitions from ringing to answered screen (call timer starts running)
- don't bring HS to ear but simply observe the screen
- what happens?
Can you reproduce this when answering an intercom call?
Re: HD3 answer call
I don't use intercom.
if auto-answer is OFF, the incoming call rings, i pick up the handset and press the green TALK button. the call timer begins, i can converse with the calling party until the counter reaches 10 seconds and the connection drops. every time.
if auto-answer is ON, the incoming call rings, i pick up the handset from charger and the call proceeds as expected.
this is the action on the 2 HD3 units. none of the HD2 units has this issue.
i can test by using my cellphone to call HD3. outgoing calls are not a problem.
base version: 414894
RFPversion: 414149
HS version: 381569
not that i think it is relevant, I have the "premium" plan and 2 phone numbers.
if auto-answer is OFF, the incoming call rings, i pick up the handset and press the green TALK button. the call timer begins, i can converse with the calling party until the counter reaches 10 seconds and the connection drops. every time.
if auto-answer is ON, the incoming call rings, i pick up the handset from charger and the call proceeds as expected.
this is the action on the 2 HD3 units. none of the HD2 units has this issue.
i can test by using my cellphone to call HD3. outgoing calls are not a problem.
base version: 414894
RFPversion: 414149
HS version: 381569
not that i think it is relevant, I have the "premium" plan and 2 phone numbers.
Re: HD3 answer call
Please disable auto-answer and try the new image on your telo. See if the problem still reproduces.
Re: HD3 answer call
YES- that works now. i see the base station version is new and other versions are the same.
Thanks!!!
Gene
Thanks!!!
Gene
-
- Posts:1
- Joined:Wed Jul 24, 2019 6:48 am
Re: HD3 answer call
I have been seeing this exact issue(incoming call cancelled after 10 sec), but on a DP1. I went into the settings and did a Sync. Now the incoming calls are proceeding normally. Was there an update that needed the phones to be reset?
Re: HD3 answer call
Sync doesn't fix it. The issue is intermittent. Upgraded both your base stations to prebeta with fix.
The issue is easier to reproduce with 4 DECT devices paired.
The issue is easier to reproduce with 4 DECT devices paired.
Re: HD3 answer call
the version you have still reproduces the problem so there will be an additional fix
Re: HD3 answer call
try the image on your telo now
Re: HD3 answer call
I am not sure if your question was directed to me or Envirosearch .... but i just got a Telo update and my HD3 still answers correctly afterwards....