1 & 2 blinking in Red
After work I tried to call my wife at home, and OOMA Telo went direct to my voice message. I cannot make and receive calls. Anyone with the same problem?
Re: 1 & 2 blinking in Red
Is the Ooma symbol blue?
If lines 1 and 2 are blinking red it sounds like a phone is Off Hook. If not, I would unplug the Telo, wait 30 seconds and plug it back in. Both lines should return to blue.
Wayne
If lines 1 and 2 are blinking red it sounds like a phone is Off Hook. If not, I would unplug the Telo, wait 30 seconds and plug it back in. Both lines should return to blue.
Wayne
Re: 1 & 2 blinking in Red
Every symbols are solid Blue, except these two buttons blinking red.
the phone is not out off hook, I double checked.
Internet is working fine also.
the phone is not out off hook, I double checked.
Internet is working fine also.
-
- Posts:2711
- Joined:Sat May 23, 2009 9:28 am
- Location:Atlanta, GA
Re: 1 & 2 blinking in Red
Even after you unplugged the power for 30 seconds and then plugged it back in?Johwwy wrote:Every symbols are solid Blue, except these two buttons blinking red.
Re: 1 & 2 blinking in Red
I recycled the power and every lights came back Blue.
Now the question is, why line 1 & 2 were flashing red?
Now the question is, why line 1 & 2 were flashing red?
-
- Posts:2711
- Joined:Sat May 23, 2009 9:28 am
- Location:Atlanta, GA
Re: 1 & 2 blinking in Red
For some reason the Telo had both line 1 & 2 off hook and on hold.
Re: 1 & 2 blinking in Red
That is the problem, because we did not touch the OOMA telo phone, we are still using our mainline phone.
I am still testing this OOMA telo, is there a log that we can take a look at it?
I wonder when did this issue started.
I am still testing this OOMA telo, is there a log that we can take a look at it?
I wonder when did this issue started.
-
- Posts:2711
- Joined:Sat May 23, 2009 9:28 am
- Location:Atlanta, GA
Re: 1 & 2 blinking in Red
If it should happen again, unplug your phone from the Telo's "Phone" port and see if the line lights go back to solid blue.
Re: 1 & 2 blinking in Red
Johwwy,
See my forum post here: http://www.ooma.com/forums/viewtopic.php?f=9&t=4331
I think I am going through the same thing, and have not gotten a real answer yet that does not involve restarting the unit at an unacceptable rate.
See my forum post here: http://www.ooma.com/forums/viewtopic.php?f=9&t=4331
I think I am going through the same thing, and have not gotten a real answer yet that does not involve restarting the unit at an unacceptable rate.