Ooma not working with router and modem in bridge mode

[Stubren]

I have a D-Link Router set up for PPOE and a Modem in ATT DSL modem in "bridge" mode.The router hub is set up for 192.168.0.1

I have set up the Ooma Telos in DHCP mode, and Automatic mode and have not been able to
access the Ooma network. I know I must be missing something. I am not familiar with DMZ and wonder if I need to use it or if I need to disable the firewall on the router. Thanks ahead of time for any advice or suggestions.

[tommies]

My att dsl modem also in bridge mode, and it works fine for ooma. Initially I had ooma between modem and router(for a few weeks), and since then I have ooma behind the router.

How do you connect yout telo to your LAN? between modem and router or behind router? I'm not familiar with the D-link product, but

ooma uses the following application ports for outbound data and voice traffic:
UDP 53, UDP 123, UDP 514, UDP 1194,UDP 3386, UDP 3480, UDP 10000-20000, TCP 53 and TCP 443.

and make sure that your router not blocking any of these ports.

[Stubren]

got it. Everything is working now.