The links won't work because they are by default only availble from the home port. You need to do some configuration of the Telo. Here is the way to set things up, thanks to an earlier post from WayneDSR. He explains it very well:funone46 wrote:I have the hub behind the router, and nothing in the home port. None of the links above worked either.
Thanks
WayneDSR wrote:If you have your Telo connected into the router as you would a pc then connect a pc or a laptop to the HOME/NETWORK port of the Telo. Restart the pc/laptop so it can obtain an ip from the telo. Open up a browser and type http://setup.ooma.com
You should now be able to see the Telo setup screen. To be able to log into the telo with out connecting to the HOME/NETWORK port you must configure the Telo.
In the ADVANCED screen at the bottom you'll see a PORT FORWARDING screen.
ADD a new rule.
Now, on the Network tab, check the box to Use Built-in MAC address.
Now go to the Status tab and observe what IP is shown on the Modem port - this is the IP your router has assigned the Telo.
Disconnect the PC and restore it to your network. Reboot things in order starting with the router. Now you should be able to access the setup screens using the Modem port IP address you noted above.
I have my Telo set up this way and it works great!