base unit doesnt light up
-
- Posts:16
- Joined:Fri Feb 19, 2010 8:02 am
My OOMA base unit ( TELO) doesnt show any lights-- but the system is working fine- I tried rebooting the system and still the same- anyone experience this ?
Re: base unit doesnt light up
Try tapping the light dimmer symbol "sun" to bring the lights up.
Wayne
Wayne
ooma customer since January 2009
ooma hardware: core (hub/scout) and Telo
Lifetime Premier Member
ooma hardware: core (hub/scout) and Telo
Lifetime Premier Member
Re: base unit doesnt light up
I am assuming you are aware of the dim button (top right) that adjust brightness.
When you reboot, do you see any lights.
Just a curious experiment, diconnect your DSL/cable modem from the phone/coax line, to simulate internet is down, wait 5-10 minutes to see if the Telo flashes red (you can also simply activate the standby button on the cable modem to also simulate this). You can reconnect after the test and things will resume normal function.
Note I use the trick above to illuminate only the Ooma logo blue on the Telo, I have the dim set to no lights and by doing the above I get this behavior, which I like.
When you reboot, do you see any lights.
Just a curious experiment, diconnect your DSL/cable modem from the phone/coax line, to simulate internet is down, wait 5-10 minutes to see if the Telo flashes red (you can also simply activate the standby button on the cable modem to also simulate this). You can reconnect after the test and things will resume normal function.
Note I use the trick above to illuminate only the Ooma logo blue on the Telo, I have the dim set to no lights and by doing the above I get this behavior, which I like.
Comcast > Telo > WRT54G
-
- Posts:16
- Joined:Fri Feb 19, 2010 8:02 am
Re: base unit doesnt light up
tapping on button was the fix- thanks