No Caller ID & Can't Access VM Remotely
On your wife's iPhone, did you turn off the "Show My Caller ID" setting in the settings on the phone, and then try calling your Ooma?
Ooma Customer since March 2009
Ooma Hardware: Hub/Scout(2) and Telo
Premier Member
Ooma Hardware: Hub/Scout(2) and Telo
Premier Member
Re: No Caller ID & Can't Access VM Remotely
EDIT: We were typing at the same time, it seems.
So many options in this digital smart phone age! The iPhone has an option to block caller ID globally, ie. on all outgoing calls, but I don't want to do that full time, although I'd be happy to try it to see if it has any effect on this issue. I have a feeling it won't make a difference, though I can't test it now as my wife is sleeping and there seems to be no way shut the ringer off on these new AT&T phones. (disappointing).
So many options in this digital smart phone age! The iPhone has an option to block caller ID globally, ie. on all outgoing calls, but I don't want to do that full time, although I'd be happy to try it to see if it has any effect on this issue. I have a feeling it won't make a difference, though I can't test it now as my wife is sleeping and there seems to be no way shut the ringer off on these new AT&T phones. (disappointing).
Re: No Caller ID & Can't Access VM Remotely
Sounds good. I'll check in with you tomorrow, and in the meantime maybe some other eyes will see your issue too.
Ooma Customer since March 2009
Ooma Hardware: Hub/Scout(2) and Telo
Premier Member
Ooma Hardware: Hub/Scout(2) and Telo
Premier Member
Re: No Caller ID & Can't Access VM Remotely
Found some more info on the incoming caller ID. It is due to your integrated land line ...
viewtopic.php?f=9&t=6390&p=45579&hilit= ... +id#p45579
viewtopic.php?f=9&t=6390&p=45579&hilit= ... +id#p45579
Ooma Customer since March 2009
Ooma Hardware: Hub/Scout(2) and Telo
Premier Member
Ooma Hardware: Hub/Scout(2) and Telo
Premier Member
Re: No Caller ID & Can't Access VM Remotely
Hmm. There are some differences b/w the fellow you link in your response and me. I'm not using DSL, but that might not be pertinent. What we DO have in common is that we both don't have caller ID, are both new subscribers to Ooma, and both still have our landlines intact.mthomtech wrote:Found some more info on the incoming caller ID. It is due to your integrated land line ...
viewtopic.php?f=9&t=6390&p=45579&hilit= ... +id#p45579
As early in the game as I am, I'll just be patient. Perhaps I'll have to simply wait until the porting is overwith, and my landline is cancelled/disconnected before I know anything for certain.
Re: No Caller ID & Can't Access VM Remotely
If you integrated a land line and don't have caller ID service on the land line, you will not have caller ID.
This is one of the reasons that I don't recommend land line integration when your plan is to port your number.
You can call CS and have them reconfigure your account to remove the land line integration and issue you a temporary number to use until the port completes. The temporary number will have all of the Ooma features. You will have to keep a separate phone connected to your land line until it goes dead on the morning the port is implemented.
If the port is due to complete in a few days, you can wait it out without caller ID until the port completes.
This is one of the reasons that I don't recommend land line integration when your plan is to port your number.
You can call CS and have them reconfigure your account to remove the land line integration and issue you a temporary number to use until the port completes. The temporary number will have all of the Ooma features. You will have to keep a separate phone connected to your land line until it goes dead on the morning the port is implemented.
If the port is due to complete in a few days, you can wait it out without caller ID until the port completes.
Customer since January 2009
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Re: No Caller ID & Can't Access VM Remotely
Well if that's the case regarding the CID part, then I'm OK with that. As long as it works as designed when the port is through. Thanks for the reply!murphy wrote:If you integrated a land line and don't have caller ID service on the land line, you will not have caller ID.
This is one of the reasons that I don't recommend land line integration when your plan is to port your number.
You can call CS and have them reconfigure your account to remove the land line integration and issue you a temporary number to use until the port completes. The temporary number will have all of the Ooma features. You will have to keep a separate phone connected to your land line until it goes dead on the morning the port is implemented.
If the port is due to complete in a few days, you can wait it out without caller ID until the port completes.
![Smile :)](./images/smilies/icon_e_smile.gif)
As for the VM, I put my iPhone on global CID block, and it doesn't make a difference.
I'll just wait it out.
Re: No Caller ID & Can't Access VM Remotely
I wonder if the CID block is also related to the land line integration then.
Murphy - if someone starts out with land line integration and ports their land line number over, will they still need to call CS to change their Ooma configuration to non-integrated to work properly?
Murphy - if someone starts out with land line integration and ports their land line number over, will they still need to call CS to change their Ooma configuration to non-integrated to work properly?
Ooma Customer since March 2009
Ooma Hardware: Hub/Scout(2) and Telo
Premier Member
Ooma Hardware: Hub/Scout(2) and Telo
Premier Member
Re: No Caller ID & Can't Access VM Remotely
No, if you wait it out they will convert it automatically when the port is completed.mthomtech wrote:Murphy - if someone starts out with land line integration and ports their land line number over, will they still need to call CS to change their Ooma configuration to non-integrated to work properly?
Customer since January 2009
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Re: No Caller ID & Can't Access VM Remotely
Thanks for the replies, fellas. ![Smile :)](./images/smilies/icon_e_smile.gif)
![Smile :)](./images/smilies/icon_e_smile.gif)