JUST INSTALLED OOMA HUB CHOSE TO PORT MY # AND OPTED FOR TEMP NO.
RED LIGHT CONSTANTLY FLASHING REBOOTED MODEM THEN ROUTER THEN HUB SAME PROBLEM
HELP ANYONE?
INSTALLATION
-
frenchcamp49er
- Posts:167
- Joined:Thu Jan 08, 2009 8:42 pm
Re: INSTALLATION
Try to install after the modem and see if it works. Another known problem is you might have entered the Mac Address wrong.
Customer Since: January 2009
Ooma Hardware: Ooma Hub/Scout; Telo 04/02/10
Ooma Service: Premier Lifetime (Since December 2009)
Ooma Hardware: Ooma Hub/Scout; Telo 04/02/10
Ooma Service: Premier Lifetime (Since December 2009)
-
7733043350
- Posts:2
- Joined:Wed Apr 21, 2010 7:56 pm
Re: INSTALLATION
THANKSfrenchcamp49er wrote:Try to install after the modem and see if it works. Another known problem is you might have entered the Mac Address wrong.
I enterd the 6 digit MAC ADDRESS?
Re: INSTALLATION
One thing to check is connect your computer to the HOME port of the Telo, open setup.ooma.com, ccheck NETWORK, select use built in MAC address. Reconnect everything. This sometimes causes issues.
Comcast > Telo > WRT54G
-
Soundjudgment
- Posts:265
- Joined:Thu Dec 11, 2008 8:46 pm
Re: INSTALLATION
A MAC address is 12 digits.7733043350 wrote:THANKSfrenchcamp49er wrote:Try to install after the modem and see if it works. Another known problem is you might have entered the Mac Address wrong.
I enterd the 6 digit MAC ADDRESS?
ooma customer since December 2008
ooma hardware: core (hub/scout) and Telo
Premier, Lifetime Member
<< The following line intentionally left blank >>
ooma hardware: core (hub/scout) and Telo
Premier, Lifetime Member
<< The following line intentionally left blank >>