Ooma, Chumby and UDP port 123
I have an Ooma Telo and two Chumby (http://www.chumby.com) internet devices.
Both Ooma and Chumby use UDP port 123 (NTP).
I originally installed the Telo before my wireless router, and the call quality was great (QOS set to 768KB).
After a month or so, my Chumby's started having trouble authorizing my account at chumby.com.
After lots of experimenting, I moved the Telo after the router, and the Chumby problem went away.
However, the call quality is not as good.
Is there some way I can put the Telo back before the router, but still allow the Chumby's to use port 123?
Both Ooma and Chumby use UDP port 123 (NTP).
I originally installed the Telo before my wireless router, and the call quality was great (QOS set to 768KB).
After a month or so, my Chumby's started having trouble authorizing my account at chumby.com.
After lots of experimenting, I moved the Telo after the router, and the Chumby problem went away.
However, the call quality is not as good.
Is there some way I can put the Telo back before the router, but still allow the Chumby's to use port 123?
Re: Ooma, Chumby and UDP port 123
What would prevent several simultaneous UDP via the Network Time Protocol Port, which is # 123?
Re: Ooma, Chumby and UDP port 123
highq,
That's a good question!
I'm not sure that the issue is the use of port 123, but I know that the Telo blocked the Chumby's ability to authorize
until I moved it after the router.
That's a good question!
I'm not sure that the issue is the use of port 123, but I know that the Telo blocked the Chumby's ability to authorize
until I moved it after the router.