Cannot recieve incoming calls
I'm experiencing "one ring to voicemail" on an intermittent basis -- four times now (to my knowledge) over the last two months or so (I've had the system for about three months). The first time this happened was the last day of my Premier trial (voice message was forwarded to e-mail and SMS with recorded attachment). The last two of these instances occurred within the last week, and in both of these two instances I was home at the time, the phone was not actively in use, and my wife was the caller.
- System: Ooma Hub with basic service.
- Multi-ring has not been enabled, although I have configured notification via one e-mail and one SMS messages are left.
- System: Ooma Hub with basic service.
- Multi-ring has not been enabled, although I have configured notification via one e-mail and one SMS messages are left.
Re: Cannot recieve incoming calls
No, I do not have muti ring set up.murphy wrote:Do you have multi-ring configured?Cougar wrote:Add me to the list of one ring incoming calls. I call my OOMA telo number from my cell phone and the Telo phone rings once and stops even though I still hear it ringing on the cell phone. It goes to voice mail after the 8th ring just as I set it up. Why does the Telo phone quit ringing even though the caller still hears the ringing?
Do you have your cell phone set as the multi-ring destination?
Re: Cannot recieve incoming calls
I am another person with the 1-ring-then-voicemail problem. It doesn't happen all the time, but it happens a lot.
I have a Telo with basic service. I have tried changing voicemail pickup delays, call-screening on and off, rebooting the box, playing with the Do-Not-Disturb key (just get a message about it being a Premier feature), and anything else I can think of. Nothing has helped.
I have a Telo with basic service. I have tried changing voicemail pickup delays, call-screening on and off, rebooting the box, playing with the Do-Not-Disturb key (just get a message about it being a Premier feature), and anything else I can think of. Nothing has helped.
Re: Cannot recieve incoming calls
Sounds like a comon issue that as far as I can tell doesn't have a solution posted anywhere on this board. I would think that Ooma would let us know what the solution is or that they are looking into it. I am a new user and find this disappointing.
Re: Cannot recieve incoming calls
Call screening is a Premier feature. If you have a basic account and have access to call screening your account data needs to be straightened out by customer support.gpw10 wrote:I am another person with the 1-ring-then-voicemail problem. It doesn't happen all the time, but it happens a lot.
I have a Telo with basic service. I have tried changing voicemail pickup delays, call-screening on and off, rebooting the box, playing with the Do-Not-Disturb key (just get a message about it being a Premier feature), and anything else I can think of. Nothing has helped.
Customer since January 2009
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Re: Cannot recieve incoming calls
Call-screening doesn't actually work, but the check-box is available on the voicemail config page, right under the number-of-rings setting. I have played with that, and it has done nothing, which is probably correct. Now you make me wonder if the mere presence of the checkbox on the page indicates a problem.murphy wrote:Call screening is a Premier feature. If you have a basic account and have access to call screening your account data needs to be straightened out by customer support.gpw10 wrote:I am another person with the 1-ring-then-voicemail problem. It doesn't happen all the time, but it happens a lot.
I have a Telo with basic service. I have tried changing voicemail pickup delays, call-screening on and off, rebooting the box, playing with the Do-Not-Disturb key (just get a message about it being a Premier feature), and anything else I can think of. Nothing has helped.
Re: Cannot recieve incoming calls
nah, checkbox is there for all basic customers.gpw10 wrote:Call-screening doesn't actually work, but the check-box is available on the voicemail config page, right under the number-of-rings setting. I have played with that, and it has done nothing, which is probably correct. Now you make me wonder if the mere presence of the checkbox on the page indicates a problem.murphy wrote:Call screening is a Premier feature. If you have a basic account and have access to call screening your account data needs to be straightened out by customer support.gpw10 wrote:I am another person with the 1-ring-then-voicemail problem. It doesn't happen all the time, but it happens a lot.
I have a Telo with basic service. I have tried changing voicemail pickup delays, call-screening on and off, rebooting the box, playing with the Do-Not-Disturb key (just get a message about it being a Premier feature), and anything else I can think of. Nothing has helped.