Flashing red logo
I picked up the phone this morning and got a busy signal.
Went downstairs to look at the Ooma Telo and saw that the logo was flashing red. I unplugged it from router, plugged and unplugged the power, restarted router.
The flashing logo went away but then the "1" and "2" buttons were flashing blue.
I went upstairs to go on the Ooma website for answers and just happened to try the phone again and IT WORKED.
Can anyone tell me why this happened?
No storms last night, ooma's on a surger protector.
Went downstairs to look at the Ooma Telo and saw that the logo was flashing red. I unplugged it from router, plugged and unplugged the power, restarted router.
The flashing logo went away but then the "1" and "2" buttons were flashing blue.
I went upstairs to go on the Ooma website for answers and just happened to try the phone again and IT WORKED.
Can anyone tell me why this happened?
No storms last night, ooma's on a surger protector.
Re: Flashing red logo
Make sure you use built in modem port mac address even if you have your Ooma behind the router.
viewtopic.php?t=9536#p66155
viewtopic.php?t=9536#p66155
Re: Flashing red logo
zamboknee wrote:I picked up the phone this morning and got a busy signal.
Went downstairs to look at the Ooma Telo and saw that the logo was flashing red. I unplugged it from router, plugged and unplugged the power, restarted router.
The flashing logo went away but then the "1" and "2" buttons were flashing blue.
I went upstairs to go on the Ooma website for answers and just happened to try the phone again and IT WORKED.
Can anyone tell me why this happened?
No storms last night, ooma's on a surger protector.
Hello,
Software update being pushed to your box.
Re: Flashing red logo
I encountered similar problems couple of times in recent two weeks:
I saw the blue logo and I picked up the phone for making a call, the Ooma Hub immediately RESTARTED and logo was flashing red.
I unplugged it from router, plugged and unplugged the power, restarted router and so on, Ooma Hub always immediately RESTARTED as long as I picked up the phone.
I powered off and on several times, the Ooma RESTART still happens all the time once I picked up the phone, around 10 minutes later and tried again to pick up the phone - it just worked.
Can anyone tell me why this happened?
The climate were well.
I saw the blue logo and I picked up the phone for making a call, the Ooma Hub immediately RESTARTED and logo was flashing red.
I unplugged it from router, plugged and unplugged the power, restarted router and so on, Ooma Hub always immediately RESTARTED as long as I picked up the phone.
I powered off and on several times, the Ooma RESTART still happens all the time once I picked up the phone, around 10 minutes later and tried again to pick up the phone - it just worked.
Can anyone tell me why this happened?
The climate were well.
Re: Flashing red logo
Last time I heard of this "reboot" problem, a Hub user was using a wrong power adapter. Can you check to see if you got the right power adapter plugged into your Ooma?
Note: Hub (white) and Telo (Black) use different power adapters. The thread below is related to the Hub.
viewtopic.php?f=4&t=9315&start=10#p64981
Note: Hub (white) and Telo (Black) use different power adapters. The thread below is related to the Hub.
viewtopic.php?f=4&t=9315&start=10#p64981
Re: Flashing red logo
The Power adpater has been used with the Ooma Hub for around two years and it works well.
I have only the Ooma Hub in my house and never have the Ooma Telo.
Anyway, thank you for your reply.
I have only the Ooma Hub in my house and never have the Ooma Telo.
Anyway, thank you for your reply.
-
- Posts:6388
- Joined:Mon Nov 08, 2010 4:41 pm
Re: Flashing red logo
It's probably still worth a try to find a 12V 1000mA power adapter at least for testing. Your old power adapter might be failing.JLI wrote:The Power adpater has been used with the Ooma Hub for around two years and it works well.
I have only the Ooma Hub in my house and never have the Ooma Telo.
Anyway, thank you for your reply.
Re: Flashing red logo
Thanks for reminding - just change the new power adapter now, and will let you know if the "reboot" will disappear in next couple of weeks.thunderbird wrote:It's probably still worth a try to find a 12V 1000mA power adapter at least for testing. Your old power adapter might be failing.JLI wrote:The Power adpater has been used with the Ooma Hub for around two years and it works well.
I have only the Ooma Hub in my house and never have the Ooma Telo.
Anyway, thank you for your reply.
Re: Flashing red logo
The problem happens again with the new power adapter!JLI wrote:Thanks for reminding - just change the new power adapter now, and will let you know if the "reboot" will disappear in next couple of weeks.thunderbird wrote:It's probably still worth a try to find a 12V 1000mA power adapter at least for testing. Your old power adapter might be failing.JLI wrote:The Power adpater has been used with the Ooma Hub for around two years and it works well.
I have only the Ooma Hub in my house and never have the Ooma Telo.
Anyway, thank you for your reply.
When picking up the phone (either try to make a call or try to answer a call), the Ooma Hub immediately REBOOT, and then the flashing the red logo with "1" & "2" in red consistently, around 1 minutes later, the logo come back to Blue; picking up again the phone and then Ooma Hub reboots again....
Does anyone can help on this problem?
Thank you in advance.
-
- Posts:6388
- Joined:Mon Nov 08, 2010 4:41 pm
Re: Flashing red logo
The Ooma Hub may be on it's last legs?JLI wrote:The problem happens again with the new power adapter!
When picking up the phone (either try to make a call or try to answer a call), the Ooma Hub immediately REBOOT, and then the flashing the red logo with "1" & "2" in red consistently, around 1 minutes later, the logo come back to Blue; picking up again the phone and then Ooma Hub reboots again....
Does anyone can help on this problem?
Thank you in advance.
Try a factory reset of the Hub:
Hub and/or Scout factory reset sequence:
1) Remove the power for the Ooma device.
2) Hold down the Ooma tab [blue light] and connect the power. Hold for 30 seconds until all the lights start flashing.
Once the lights stop flashing, release the Ooma tab and the device will reset to factory settings.
I noticed that some people say they have to do the reset several times in a row before they have success for the problem that they are having.