Page key won't respond
I am trying to connect a new telo handset to ooma telo. I have the PIN.
The instructions say to press and hold the top right 'page' key for 3 seconds until it starts to flash. I tried it many times but the icon never flashes. I have rebooted several times (by disconnecting the power) and have done a reset by dialing *#*#099, with no success. Any suggestions?
AB
The instructions say to press and hold the top right 'page' key for 3 seconds until it starts to flash. I tried it many times but the icon never flashes. I have rebooted several times (by disconnecting the power) and have done a reset by dialing *#*#099, with no success. Any suggestions?
AB
Re: Page key won't respond
Hold the button until a female voice tells you registration mode is enabled.
Customer since January 2009
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Re: Page key won't respond
murphy wrote:Hold the button until a female voice tells you registration mode is enabled.
I held the button/icon for over 60 seconds and nothing happens.
Re: Page key won't respond
Press the top left button. Does it speak the volume level? Silent, 1, 2, 3, 4 in sequence.
What firmware version do you have?
What firmware version do you have?
Customer since January 2009
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Re: Page key won't respond
murphy wrote:Press the top left button. Does it speak the volume level? Silent, 1, 2, 3, 4 in sequence.
What firmware version do you have?
Murphy - Thanks for your help!
The speaker icon does speak. How do I find out the firmware version. I have just connected a laptop to the home network port at the back and am accesing the ooma setup page but don't see the firmware version.
AB
Re: Page key won't respond
Atulb wrote:murphy wrote:Press the top left button. Does it speak the volume level? Silent, 1, 2, 3, 4 in sequence.
What firmware version do you have?
Murphy - Thanks for your help!
The speaker icon does speak. How do I find out the firmware version. I have just connected a laptop to the home network port at the back and am accesing the ooma setup page but don't see the firmware version.
AB
I see version - 52474 next to my phone number. Is this the firmware version?
Re: Page key won't respond
Yes, 52474 is the latest release.
Press and hold the envelope key. Does it speak?
Press and hold the envelope key. Does it speak?
Customer since January 2009
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Re: Page key won't respond
murphy wrote:Yes, 52474 is the latest release.
Press and hold the envelope key. Does it speak?
yes it cycles through 'do not distrub - on and off'.
Re: Page key won't respond
Does a quick press and release of the antenna key (upper right corner) say anything?Atulb wrote:murphy wrote:Yes, 52474 is the latest release.
Press and hold the envelope key. Does it speak?
yes it cycles through 'do not distrub - on and off'.
Customer since January 2009
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Telo with 2 Handsets, a Linx, and a Safety Phone
Telo2 with 2 Handsets and a Linx
Re: Page key won't respond
murphy wrote:Does a quick press and release of the antenna key (upper right corner) say anything?Atulb wrote:murphy wrote:Yes, 52474 is the latest release.
Press and hold the envelope key. Does it speak?
yes it cycles through 'do not distrub - on and off'.
No it does not.