For the Ooma Hub, changing to use Built In MAC Address is almost identical to the Ooma Telo procedrue. The words Internet are replaced by Network.jhumroo wrote: Are these instructions applicable to the original Ooma device?
I don't have an Ooma Telo.
The reset procedure for the Ooma Hub is as Follows:
Notice that you can do a factory reset of the Scout also.
See these threads:
viewtopic.php?f=2&t=4557&p=32600&hilit= ... out#p32600
Did you do the factory reset for the Hub, then the Scout:
Hub and/or Scout factory reset sequence:
1) Remove the power for the Ooma device.
2) Hold down the Ooma tab [blue light] and connect the power. Hold for 30 seconds until all the lights start flashing.
Once the lights stop flashing, release the Ooma tab and the device will reset to factory settings.
Some people say they have to do the reset several times in a row before they have success.