Environment Protection

Problems using My Ooma? Ideas on how we can make it better? You’ve come to the right place.
Post Reply
fish13a
Posts: 11
Joined: Mon Dec 23, 2019 8:52 pm

Environment Protection

Post by fish13a » Mon Dec 23, 2019 9:10 pm

Zinc smoke collecting enclosure
The working space above zinc kettle for work piece getting galvanized is an enclosure room. The work piece get into the space through a moving channel on the top of zinc fume cover. As soon as the work piece contact with melt zinc, the dust, smoke and zinc splash are produced. The work piece is dipped in the melt zinc and stay for several minutes and alloy layers of steel and zinc are formed.

There are two kinds of zinc smoke blowing devices, blow the zinc fume into pipes and filter system when the movable side door open for galvanized work piece out of enclosure room. The blowers locate beside zinc kettle, this is one type; blower locate on one end of zinc kettle, this is another type. These are our normal method to blow the zinc fume into filter system.
If you have interest on our machine and device, please contact us, amanda@machine-steel.comEnvironment Protection
website:http://www.starisemachine.com/galvanizi ... rotection/

Post Reply